What's the part number? TLN8624, K1000, KLN6209, KLN6210, or what? Usually the transmit side uses a Vibrasender, the receive side uses a Vibrasponder, but on an MSR a 'sponder will work on both sides.
At 08:57 AM 03/29/07, you wrote: >On a related issue, do any of you have a couple of 100 Hz. >Vibrasponders I could acquire for a 2m MSR2000 project? > > >At 02:36 AM 3/29/2007, you wrote: > >PL incode will be all the time , the PL disable is the PL DECODE what the > >repeater hears, > > > >and what you want to turn off and on .. I have full time incode on my > >repeater so I don't have to hear the intermod while I drive past a page'n > >tower > > > >Good luck ! > > > >Rick > > > >On 28 Mar 2007 at 21:12, Doug wrote: > > > > > I have just about completed setting up the MSR2000 as per the > > > article by K4HAL and WA6ILQ > > > and it appears to work just great. I have to interface it to the 7k > > > and Doug Hall interface and > > > it will be ready to go. All the cabling is done. The only option > > > cards left in are the TOT and > > > the Station Control card. > > > > > > However, when I key the radio, it appears the pl tone is being > > > transmitted all the time. The > > > PL DISABLE switch has no affect on it. Is this normal?? It seems > > > unusual to me, but I don't > > > think it will hurt the operation. I can kill it if I ground pin 14 of > > > the pl board which is > > > a dual tone board. However, I want to be able to control the pl > > > operation via the 7K. There > > > are times when it would be useful. Does anyone have any ideas on > > this tone?? > > > > > > Thanks > > > > > > 73 > > > Doug VE5DA > > > > > > > > > >Of all the intelligent animals, Human is the species that is least > >likely to learn > >from its experience. > >That explains why so manny of us have more then one Border Collie ! > > > >== www.karolinabc.ca == > > > >Rick,Charlote & Kids > >Our Border Collies > >Miss Daisy Duke > >Sir Red-A-Lot > >Miss Elly May > >Mr Boots > >Mr. Balue > >Our Border Collie Message Group > >[EMAIL PROTECTED] > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > >Thanks, >Robin Midgett K4IDC >615-322-5836 office - rolls to pager >615-835-7699 pager >615-301-1642 home >[EMAIL PROTECTED] >http://www.people.vanderbilt.edu/~robin.midgett/index.htm > > > > > > >Yahoo! Groups Links > > >
