47/48 is for single freq stations, do you have 68/69 cut? Are you sure the decoder is good?
Pin 3 enable/disables the decoder, pin 5 activates rx mute to squelch the rec and RUS when no sub tone is detected. Pin 4 is 10v for reference. 73 Don W5DK From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of NORM KNAPP Sent: Sunday, March 30, 2008 8:20 AM To: [email protected] Subject: [Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode. HELP!!! I have converted a Mastr II station to a repeater, but no PL decode. I cut 2 jumpers on the system board and still no decode. It works carrier sql. I have the factory GE decode board installed on the system board and on the 10v reg. Juimpers 1-2 and 1-3 are installed. What gives? I have cut jumpers H41-H42 and H47-H48 on the system board and still no decode. It is still carrier SQL. Thanks. 73 de N5NPO Norman Knapp
