Problem solved! CG decode restored! Reconnecting H41-H42 jumper restored the CG decode. I am now going to attemp to inteface to a RC-1000. Wish me luck. My thanks to the hams who helped. You know who you are. 73 all!
----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Sun Mar 30 15:04:32 2008 Subject: Re: [Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode. 68-69 are cut. I guess the card is good. It is a GE card wit dip switches on it. I just noticed a cut trace on the system bord. It looks like it connects to pi 8 labled RUS. Might that be the problem. 73 de N5NPO Norm ----- Original Message ----- From: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> <[email protected] <mailto:Repeater-Builder%40yahoogroups.com> > To: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> <[email protected] <mailto:Repeater-Builder%40yahoogroups.com> > Sent: Sun Mar 30 13:20:08 2008 Subject: RE: [Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode. 47/48 is for single freq stations, do you have 68/69 cut? Are you sure the decoder is good? Pin 3 enable/disables the decoder, pin 5 activates rx mute to squelch the rec and RUS when no sub tone is detected. Pin 4 is 10v for reference. 73 Don W5DK From: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> [mailto:[email protected] <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of NORM KNAPP Sent: Sunday, March 30, 2008 8:20 AM To: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> Subject: [Repeater-Builder] Mastr II station 2 repeater conversion.... HELP no PL(CG) decode. HELP!!! I have converted a Mastr II station to a repeater, but no PL decode. I cut 2 jumpers on the system board and still no decode. It works carrier sql. I have the factory GE decode board installed on the system board and on the 10v reg. Juimpers 1-2 and 1-3 are installed. What gives? I have cut jumpers H41-H42 and H47-H48 on the system board and still no decode. It is still carrier SQL. Thanks. 73 de N5NPO Norman Knapp
