Any other CSI/NHRC experts out there have an idea on how to interface the CSI TP-3200 for encode/decode function to the NHRC-7 Controller?
73s, AJ, K6LOR On Sun, Jan 25, 2009 at 11:10 PM, skipp025 <skipp...@yahoo.com> wrote: > > > I am in fact using a CSI TP-3200 shared repeater tone > > panel (single unit in the 19" form factor). > > I know of a number of less common CSI (Ventura, CA) tone > panels... if you're panel wasn't the CSI Washington or Com-Spec > TP-3200 then there's only one mfgr left using the CSI label. > > > I'm at a bit of a loss on this one > > > Given the NHRC-7 controller with it's PL encode and PL > > decode pins, what exactly would the interface be between > > the TP3200 and the NHRC-7? > > Ideas? > > I'm going to roll over and drop out of this thread. You need > to talk directly with some of the GE Master II people who > have done external controller connections. > > Don't forget to check the Repeater-Builder.com web page for > related information. > > good luck, > s. > > >