All you have to do is, like you thought, program the 3200 for no hang time and blank the ID's. The rx in to the 3200 comes from the discriminator, like you probably have it now. A COS line from the rx goes to the COS in on the NHRC. The PTT out from the 3200 goes to the CTCSS in on the NHRC. Also tx audio out from the 3200 goes to rx audio in to the NHRC. Encode CTCSS from the 3200 goes straight to the CTCSS tone input on the exciter. About as simple as it gets. The 3200 is a normal tone panel, and the NHRC is a straight-forward ham controller, so this will apply to almost every combination of tone panel/ham controller out there.
AJ wrote: > Any other CSI/NHRC experts out there have an idea on how to interface the > CSI TP-3200 for encode/decode function to the NHRC-7 Controller? > > 73s, > > AJ, K6LOR >
