Good grief folks, how difficult is this? Checkout the website site below. For example: in San Diego it shows KPBS as channel 15-1. Click on the call letters. It shows channel 15, the former analog channel and what it still is identified as.. Then it shows (RF 30), that's the channel it's on in the digital transition, but it identifies as Channel 15-1.
The nice map also shows where the transmitter is located and a engineering "SWAG" as to the signal level to expect. The Digital TV Transition: DTV Reception Maps http://www.fcc.gov/mb/engineering/maps/ Ken ----- Original Message ----- From: JOHN MACKEY To: Repeater-Builder@yahoogroups.com Sent: Friday, March 06, 2009 12:41 PM Subject: Re: [Repeater-Builder] Somewhat OT - How to make HDTV *really* work What is the callsign of the (ch. 7) station we are talking about? ------ Original Message ------ Received: Fri, 06 Mar 2009 12:35:36 PM PST From: "Chuck Kelsey" <wb2...@roadrunner.com> To: <Repeater-Builder@yahoogroups.com> Subject: Re: [Repeater-Builder] Somewhat OT - How to make HDTV *really* work > The same. > > > ----- Original Message ----- > From: "JOHN MACKEY" <jmac...@usa.net> > To: <Repeater-Builder@yahoogroups.com> > Sent: Friday, March 06, 2009 3:28 PM > Subject: Re: [Repeater-Builder] Somewhat OT - How to make HDTV *really* work > > > > What frequency was channel 7 digital and frequency channel 7 analog? > > > > ------ Original Message ------ > > Received: Fri, 06 Mar 2009 08:12:39 AM PST > > From: wd8chl <wd8...@gmail.com> > > To: Repeater-Builder@yahoogroups.com > > Subject: Re: [Repeater-Builder] Somewhat OT - How to make HDTV *really* > > work > > > >> Paul Plack wrote: > >> > Jim, > >> > > >> > You might want to "READ IT AGAIN" yourself. Here's where the > >> > misunderstanding started. > >> > > >> > John wrote that if the digital is on a very different frequency, > >> > reception may be different. Your response was that if your antenna > >> > worked on one, it should work on the other, "Period." You appeared to > >> > have a misunderstanding. Don't get mad at people who try to help. > >> > That's kinda why this place exists. > >> > >> No, that's not what I said. I said that if an antenna works on CH7 > >> analog, it should work on CH7 digital, and if it doesn't, the problem is > >> the source. > >> > > > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > >
