Mike, After posting, I rigged up my Fluke 199C (200MHz) to the audio generator through the powerpole connector.. I beat the heck out of the connector to see if there would be any artifacts. I saw nothing.
If your HP scope is faster, I'll ship the pigtails to you for a sanity check. Martin. Mike Morris WA6ILQ wrote: > > Where are you located? I have a portable HP storage scope. > > Mike WA6ILQ > > At 06:21 PM 05/08/09, you wrote: > >I have the factory Anderson Power Products 1309G2 crimper and legit > >APP parts. I just built a two pole loop connector & hung 4# from > >the loop with no separation. It did separate with a 5# weight. > > > >Rebuilt the rig to feed a 2600HZ tone to the left channel of the > >sound card though a pair of 15 amp connectors, the same source was > >fed directly to the right. > > > >I recorded 60 seconds of audio while holding a jitterbug sander to > >the connector. The audio looks exactly in both channels when > >played back with audacity. > > > >Anyone have a decent storage scope to repeat the test with? I will > >ship the power pole connector pigtails to your location if you want > >to repeat & publish the results. > > > >Martin > > >