When you find out what is going on with that, let me know. I have installed one or two of them with that blank stub myself. Is this for a DB-224A or DB-224E or what? Is this a replacement harness? Have you swept it with a sitemaster or an antenna analyzer? 73 de N5NPO
----- Original Message ----- From: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> To: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> Sent: Tue Jun 30 16:33:25 2009 Subject: [Repeater-Builder] DB-224 Phasing Harness Here we go again! Got a new harness about a year ago, & now that I'm fixing to put the antenna up, it's time to put it on. Top section was fine (had to re-locate the ground lugs, as the actual antenna is kinda old). Anyway, started on the bottom section & noticed that there was a length of coax coming out of one of the 'Y's that had no connector & was not sealed. Both ends with N connectors (to top & to station) are attached, it's just this appendage that has no covering that bothers me! I've called Andrew on the antenna, but they haven't called me back yet, so figured I'd ask the real experts what this thing is. Obviously, if it's supposed to be there, I'll seal it up. Thanks, Tim W5FN
