Hi NPO, It's a replacement harness - the other one had problems, so we just ordered a new one.
Haven't looked at it on analyzer - was gonna do that when I got it installed. I'll keep you posted. Tim --- In Repeater-Builder@yahoogroups.com, "NORM KNAPP" <nkn...@...> wrote: > > When you find out what is going on with that, let me know. I have installed > one or two of them with that blank stub myself. Is this for a DB-224A or > DB-224E or what? Is this a replacement harness? Have you swept it with a > sitemaster or an antenna analyzer? > 73 de N5NPO > > ----- Original Message ----- > From: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> > To: Repeater-Builder@yahoogroups.com <Repeater-Builder@yahoogroups.com> > Sent: Tue Jun 30 16:33:25 2009 > Subject: [Repeater-Builder] DB-224 Phasing Harness > > > > Here we go again! > > Got a new harness about a year ago, & now that I'm fixing > to put the antenna up, it's time to put it on. > > Top section was fine (had to re-locate the ground lugs, as > the actual antenna is kinda old). > > Anyway, started on the bottom section & noticed that there > was a length of coax coming out of one of the 'Y's that > had no connector & was not sealed. > > Both ends with N connectors (to top & to station) are attached, > it's just this appendage that has no covering that bothers > me! > > I've called Andrew on the antenna, but they haven't called > me back yet, so figured I'd ask the real experts what this > thing is. Obviously, if it's supposed to be there, I'll > seal it up. > > Thanks, > > Tim W5FN >
