Yes Doug I found that info but there was nothing about a Mod. Yes I did look before I posted. ??????? Freddy
--- In Repeater-Builder@yahoogroups.com, "n3dab" <rb_n3...@...> wrote: > > I googled WACOM 604 duplexer and came up with a bunch of info., you might try > the same. I found a 2 page WACOM 604 flyer with the specs says the A,B and C > cans are 80" tall, and the D can is 72" tall. Logic would say shorten the > inner rod 8", but loop size might be smaller and the harness cables may be > different length as well. LOL on your project. Hope some one else has more > info to help you out. > > Doug N3DAB > > --- In Repeater-Builder@yahoogroups.com, "ag4uw" <ag4uw@> wrote: > > > > Hello group!! I am looking for someone that has info on mods for the wacom > > 604B duplexers to put them in the ham band 604D. And does anyone know how > > to remove the the tuning rod from the wacom duplexers??? Does the big nut > > on the top unscrew or can it be removed??? I am looking for info but have > > not been able to find anything on doing this mod. If I can remove the > > copper rod from the can I was going to try to cut it shorter,(If you know > > how long the tuning rod is on the D model please let me know. It can not be > > cut off from the end because it has finger stock on that end and will have > > to be cut off at the top. If anyone has any info please let me know. if you > > have the info on how long to cut the tunning rod off are know how long the > > tuning rod is on the 604D or have any info on how to remove the rod please > > let me know. any info you may have would be great. Thanks Freddy N4XW > > >
