Thanks for the info. Somewhere else I read that from the mount to the outer edge the length should be 51 inches, this will be about the same as 52.5 inches from center to outer edge.
But to build one from scratch I need more info, radius of the loop, diameter of the tube, coupling etc. Of course these can be calculated from formulas, but as the DB212 seems to be a particular good design it would be interesting to know. --- In Repeater-Builder@yahoogroups.com, "JOHN MACKEY" <jmac...@...> wrote: > > I converted one about 15 years ago for use on 6 meters. It measured 52.5 > inches from center to outer edge. > > ------ Original Message ------ > Received: Sat, 14 Nov 2009 10:41:05 AM PST > From: "cruizzer77" <atlant...@...> > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] DB-212 detailed info wanted > > > Does anyone have detailed info about the DB-212 antenna (converted to 6m) > that make it possible to build one from scratch? > > > > All the measures and info about the mount and feed point are interesting in > the first place. > > > > 73 de Martin HB9TZW > > > > > > > > >
