Stephen; We have two dr235 on a repeater and cat 200b controller used everything right out of the 9 pin dsub on the back of ther radios. It has been up and player now for about three years.
I am not that familiar with the controller you are using but you will more than likely have to put in pullup resistor for the cor the radios are open collector. 73 ----- Original Message ----- From: ve6cpu To: Repeater-Builder@yahoogroups.com Sent: Saturday, January 30, 2010 12:10 AM Subject: [Repeater-Builder] Alinco DR-135 and RLC-4 Just a warning up front. I'm really new to the RLC-4. I've done 1200bps packet on a bunch of different radios. I've got my hands on a RLC-4 that I'm thinking of hooking up to a pair of dr-135 radios. Looking at the docs on the both the controller and the radio it seems I could use the 9 pin din on the back of the alinco to run audio and COS to and from the controller. Just wondering if anyone out there has tried this before? Is this something that can be done easily or do I have to get in to the radio and pull the audio and COS from somewhere else? I don't want to hurt either piece of equipment just trying things out. Thanks for any help you can provide. Stephen VE6CPU ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.733 / Virus Database: 271.1.1/2656 - Release Date: 01/29/10 13:35:00