Well I'd try a 2 3 3 5, fits where a 2 1 3 5 goes and may do the job. Jim- WA9FPT
----- Original Message ----- From: Gary Schafer To: Repeater-Builder@yahoogroups.com Sent: Tuesday, February 23, 2010 9:54 PM Subject: RE: [Repeater-Builder] Motorola cabinet key wanted Hi Bill, The key is like a 2135 and a 2135 will fit in the lock (I have a 2135) but it will not open it. I actually have two of these station cabinets and my 2135 key will not open either cabinet. I kind of remember that some of the cabinets had a different key from the mobiles way back when. Any other guesses? Thanks Gary K4FMX ------------------------------------------------------------------------------ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Bill Hudson Sent: Tuesday, February 23, 2010 10:37 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Motorola cabinet key wanted Just because I gamble a little - I'm going to bet that the older Motorola cabinet is a CH751. This is a one sided key unlike a 2135. The Micor cabinets became a 2553. Cabinet Keys more prominent in the high power stations. I'll go along with the BF10a for the Prog Line - that's for sure. Bill Hudson W6CBS ------------------------------------------------------------------------------ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Andrew Seybold Sent: Tuesday, February 23, 2010 6:18 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Motorola cabinet key wanted The Motorola key should be a 2135 and the GE Key is probably a BF10A, they are hard to find but around-I can make you copies if you want to pay the key making price and postage. Andy W6AMS From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Gary Schafer Sent: Tuesday, February 23, 2010 6:16 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Motorola cabinet key wanted I am in need of a cabinet key for an old Motorola base station cabinet. It is an old low band 1/4 kw rig. Had 100TH tubes in final. This is the 6 foot tall cabinet. Anyone know the key number for these? Have a key? Also have an old GE progress line base cabinet that needs a key. This cabinet is about 3 feet tall and longer than wide. Thanks! Gary K4FMX