You mean 2553 right? James K7ICU
--- In Repeater-Builder@yahoogroups.com, "Jim McLaughlin" <dearbo...@...> wrote: > > Well I'd try a 2 3 3 5, fits where a 2 1 3 5 goes and may do the job. > > Jim- WA9FPT > > > ----- Original Message ----- > From: Gary Schafer > To: Repeater-Builder@yahoogroups.com > Sent: Tuesday, February 23, 2010 9:54 PM > Subject: RE: [Repeater-Builder] Motorola cabinet key wanted > > > > > Hi Bill, > > > > The key is like a 2135 and a 2135 will fit in the lock (I have a 2135) but it will not open it. I actually have two of these station cabinets and my 2135 key will not open either cabinet. > > > > I kind of remember that some of the cabinets had a different key from the mobiles way back when. > > > > Any other guesses? > > > > Thanks > > Gary K4FMX > > > > > ------------------------------------------------------------------------\ ------ > > From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Bill Hudson > Sent: Tuesday, February 23, 2010 10:37 PM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] Motorola cabinet key wanted > > > > > > > > > > > Just because I gamble a little - I'm going to bet that the older Motorola cabinet is a CH751. This is a one sided key unlike a 2135. > > > > The Micor cabinets became a 2553. Cabinet Keys more prominent in the high power stations. > > > > I'll go along with the BF10a for the Prog Line - that's for sure. > > > > Bill Hudson > > W6CBS > > > > > ------------------------------------------------------------------------\ ------ > > From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Andrew Seybold > Sent: Tuesday, February 23, 2010 6:18 PM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] Motorola cabinet key wanted > > > > > > The Motorola key should be a 2135 and the GE Key is probably a BF10A, they are hard to find but around-I can make you copies if you want to pay the key making price and postage. > > > > Andy W6AMS > > > > From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Gary Schafer > Sent: Tuesday, February 23, 2010 6:16 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Motorola cabinet key wanted > > > > > > I am in need of a cabinet key for an old Motorola base station cabinet. It > is an old low band 1/4 kw rig. Had 100TH tubes in final. This is the 6 foot > tall cabinet. > > Anyone know the key number for these? > Have a key? > > Also have an old GE progress line base cabinet that needs a key. This > cabinet is about 3 feet tall and longer than wide. > > Thanks! > Gary K4FMX >