Or just leave the relay "energized" all the time. 5. Place a SHORTED RCA plug into the RCA jack located on the rear of the amplifier. This will cause the transmit relay to energize when the amplifier power is switched ON.
--from the tuneup instructions-- Kb0wlf > -----Original Message----- > From: Repeater-Builder@yahoogroups.com [mailto:Repeater- > buil...@yahoogroups.com] On Behalf Of ad6nh > Sent: Friday, May 14, 2010 2:56 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] B-215G SSB Delay Adjustment > > Good afternoon. Does anyone know which of the adjustment pots controls > the SSB Delay in the Mirage B-215G amplifier? They are not labeled on > the board, and I do have a scribble schematic that Mirage sent me, but > it has not been much help. I am successfully using this amplifier on a > D-Star repeater system in SSB mode (keeps the relay chirping down and > handles the narrow bandwidth of the D-Star transmission quite nicely). > I would like to adjust the relay lag to max to prevent it from unkeying > between each transmission in a conversation, so as to preserve the > actual relay. Thanks for any help! > > 73 > Phil - AD6NH > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.437 / Virus Database: 271.1.1/2868 - Release Date: > 05/14/10 06:26:00
