The "tuneup" pdf actually has a typo on the last page referencing a 108g amp. My 108g say:
Ssb delay: it can be accessed through the right side of the cover in a position that is located halfway between the front and rear of the panel. Or the constant energized option. ;) Kb0wlf > -----Original Message----- > From: Repeater-Builder@yahoogroups.com [mailto:Repeater- > buil...@yahoogroups.com] On Behalf Of ad6nh > Sent: Friday, May 14, 2010 3:09 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Re: B-215G SSB Delay Adjustment > > > > --- In Repeater-Builder@yahoogroups.com, "Chris Curtis" <demo...@...> > wrote: > > > > Sorry I can't help with the relay delay, but how about using the > external > > key line? > > That way you take control away from the amp and give it to the > controller? > > Not a bad thought, but D-Star has almost no hang-time compared to an > adjustable hang-time on an analog system. Therefore, by running the > amp in FM mode or using the external key line, the relay would be > subject to much more switching than it currently is in SSB mode with > the approx 750ms delay. Sometimes, if someone is quick on the key on a > reply, the amp will remain engaged. > > 73 > Phil - AD6NH > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.437 / Virus Database: 271.1.1/2868 - Release Date: > 05/14/10 06:26:00