Ok, I can get you the date code tomorrow if you find some spare time to check. It's too bad I couldn't get a copy of the original code and maybe modify it myself. I like to tinker around with existing programming a bit, but I wouldn't know where to begin if I were to start from scratch.
Jeff, KB1SPH / WQEX694 -------------------------------------------------- From: "skipp025" <skipp...@yahoo.com> Sent: Monday, July 12, 2010 2:18 PM To: <Repeater-Builder@yahoogroups.com> Subject: [Repeater-Builder] CSI-32 (Lynnwood Washington) Repeater Tone Panel Controller Information > > > >> "Jeff Lavoie - KB1SPH/WQEX694" <kb1...@...> wrote: >> Thanks Skipp, that helps a great deal. I've found a lot of >> useful information on repeater-builder.com over the years, > > Hi Jeff, > Just don't buy a car from any of us and you'll be fine. > >> I was wondering if you had any information about a >> CSI-32 tone panel and possible firmware upgrades. The >> EPROM inside has a sticker on it that says the >> following. >> 128 v4.0 >> 6289 (I think, hard to read) >> © CSI > > In regards to the CSI (Lynnwood Washington CSI, not the Ventura > CA. CSI) brand of Repeater Tone/DCS Controllers. The latest > firmware version is based on the PC Board date of construction, > which is most often silk screened in white ink right on the board. > > V4.0 was one of the last firmware versions available for most > of the CSI-32 Controllers. As time allows I could check my files > for firmware information but I would need to know your pc board > date code in addition to all the other details. Right now I'd say > the 4.0 stuff is pretty much it in regards to updates. > > cheers, > s. > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >
