I'm only looking to recoup what I have invested in them... $50 for the pair. At the moment, I have lots of spares, but sure, I'll take another set.
If you do Paypal, you can pay me at ka3...@aol.com. George, KA3HSW > >From: Jeff Lavoie - KB1SPH/WQEX694 <kb1...@wqex694.info> >To: Repeater-Builder@yahoogroups.com >Sent: Mon, July 12, 2010 10:17:12 PM >Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements > > >Actually 462.600 is the frequency I'm currently running my Kenwood on. I >would probably be putting the Motorola on the same frequency with a >different PL at a different location. That would solve a lot of headaches >if you're willing to part with them. I was thinking about doing ham later >down the road if GMRS goes away, I'm sure you've all heard about the >proposed rule changes. But until I hear that GMRS repeaters are not allowed >(or must be narrow band) I'll be setting it up on GMRS. The Kenwood is more >set up for a portable repeater for events right now. A group of us get >together and help out with events when there aren't enough ham volunteers. > >Let me know what you want for the channel elements. If you're interested I >would be willing to send you a set of channel elements back if you need them >as spares. > >Jeff, KB1SPH / WQEX694 > >-------------------------------------------------- >From: "George Henry" <ka3...@att.net> >Sent: Monday, July 12, 2010 1:59 PM >To: <Repeater-Builder@yahoogroups.com> >Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements > >> What frequencies are you looking for? Ham or GMRS, I presume... I've got >> a >> bunch of MSR-2K elements if you need any, including a set for a 462.600 >> GMRS >> repeater. >> >> >> >> George, KA3HSW / WQGJ413 >> >> >>> >>>From: Jeff Lavoie - KB1SPH/WQEX694 <kb1...@wqex694.info> >>>To: Repeater-Builder@yahoogroups.com >>>Sent: Mon, July 12, 2010 1:15:28 AM >>>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements (and a >>>guacamole recipe) >>> >>> >>>Thanks Skipp, that helps a great deal. I've found a lot of usefule >>>information on repeater-builder.com over the years, but I just finally >>>signed up for the yahoo group yesterday, I don't know why I waited. >>> >>>Bomar sounds like a good place to start with. >>> >>>I got this MSR-2000 for $25 at a hamfest because the guy didn't want to >>>load >>>it up in his truck to take it back home. I was buying a Kenwood TKR-820 >>>and >>>he said, "I'll tell you what, I'll give you the pair for $50." How could I >>>go wrong? The Kenwood is working great thanks to repeater-builder.com. >>> >>>On another note, I sent you a message a few days ago, but sometimes yahoo >>>blocks my messages....not sure why. >>> >>>I was wondering if you had any information about a CSI-32 tone panel and >>>possible firmware upgrades. The EPROM inside has a sticker on it that says >>>the following. >>> >>>128 v4.0 >>>6289 (I think, hard to read) >>>© CSI >>> >>>- Jeff >>> >>