On 06/01/16 13:17, Estelmann, Christian wrote:
your probe is tagged as "readonly flash drive".
Disconnect the probe, connect the usb stick to your computer and test it
(e.g. delete all partitions, create own partitions and write some data
to it). If data can not be written to the usb stick a) disable the write
lock, b) replace it by a new one one (4 GB capacity at minimum).
Then reconnect the probe (power and ethernet, but without the usb
stick), wait 5 minutes and then plug in the usb stick.
Thanks - looks like that was it. The original drive has gone read-only,
swapping it for another USB stick has fixed the issue.
--
- Steve
