Thanks for the heads up, Todd. Had same problem under Knoppix
BUT
it made me think of something else also very simple (of course and
obvious too, duh.)
I have two USB ports in front and 6 in back.
The ones in back work just fine - under Knoppix or Ubuntu, so I can at least
(mostly) work around the issue.
However, there is still power going to the ones in front, because if I
plug in either
my PDA or Motorola phone - they start charging.
Now taking that a step further, I was attempting to work with moto4lin
and kmobiletools
while I had a Motorola cell phone plugged into the front ports.
So as I trace things back - it appears that something having to do with
that process has probably ^&#$ed the
front usb ports &/or controller. I made sure neither package was
running after I re-booted but still no joy when I
plug in a USB device in front.
Ideas on how they might be resurrected?
Dennis
Todd A. Jacobs wrote:
On Thu, Jul 13, 2006 at 01:23:55PM -0700, Dennis Bagley wrote:
[4298102.335000] ehci_hcd 0000:00:1d.7: port 3 reset error -110
[4298102.336000] hub 5-0:1.0: hub_port_status failed (err = -32)
It's telling you that it can't sync with the device because it can't
talk to the hub. Before you get exotic, can you get things working under
Knoppix? If not, you might want to consider whether you have a USB hub
that's gone bad.
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
