On 10 Mar 2012, "Terry Duell" <[email protected]> wrote: > On Sat, 10 Mar 2012 09:48:18 +1100, Tony Moore <[email protected]> > wrote:
[snip] > > It was also necessary to copy over a few files (sorry cannot remember > > which) I now remember that these were the files in RPCEmy\hostfs\Network which need to be installed in !Boot, as described in the User Manual. [snip] > I'm running RPCEmu on Fedora 16. Sorry, I know nothing about Linux. [snip] > I copied the boot sequence into hostfs. I copied the 5.19 rom image > into roms. My 4.39 rom image was still there, but assumed it was still > needed, as when I tried without it I get an error message that gives > me no options whatsoever...'exit'! Tom has already pointed out that there should be only one rom image present. I've no idea about the error message. Is something wrong with the rom image? Have you installed the _RO5_ boot? > When RPCEmu booted I checked that the CPU was SA110, which it normally > is. Not here, The default was ARM610, which leads to a fatal ',ofla,ofla' error. Perhaps this has now been changed in the distribution files. [snip] > I then chose Shutdown > restart, and I end up with a green screen > with red error message "File '@.!Boot' not found, any key to continue" [snip] > The only thing I able to do to recover is to reset my boot drive to > adfs:4, which allows me to reboot into RO4.39. This seems to confirm that your boot sequence needs to be changed from RO4, to RO5 (available from ROOL). Tony _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
