In article <[email protected]>, george greenfield <[email protected]> wrote: > The issue is with RO 5.19 surely, not RPCEmu? I'm running a W7(64-bit) > system using RPCEmu 0.8.9/4.02 and networking is rock solid, settings > are retained between reboots of the master PC, and in all ways the > RPCEmu system behaves exactly like native hardware. I've set the > network bridge up on a cabled connection with fixed IP addresses, and > disabled DHCP in the router. The PC side connects wirelessly and > obtains an IP address automatically, and that too is stable. Of course > I would prefer to be running 5.19 and get the advantages over 4.02 > that would bring, but ATM reliable, hands-off (i.e. not having to > rebuild settings after each reboot) networking is a must-have for me. > Sounds like 5.19 is not there yet, unfortunately.
> George No George, the same was happening with 5.17 I don't think it's a RPCEmu problem as such, just the method used to network connect. Dave -- Dave Triffid _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
