I will definitely try that out. It would be great to automate all tests on this board. It seems less than 10 seconds to load a 1 megabyte RTEMS image to the Pi using JTAG.
Alan On Mon, Apr 28, 2014 at 7:20 PM, Chris Johns <[email protected]> wrote: > On 29/04/2014 12:34 am, Alan Cudmore wrote: > >> >> The FT2232H MiniMod is working so far! I am able to use the UART and at >> the same time load and run images over the JTAG interface using OpenOCD. >> Next, I plan on trying GDB. I will try to document the setup soon, but >> it just requires ~10 jumper wires to connect the MiniMod to the Pi GPIO >> header. >> > > The rtems-tester works well with OpenOCD and GDB. Please take a look at > the recent BeagleBoard xM script Ben and I are currently using ... > > http://git.rtems.org/rtems-tools/tree/tester/rtems/ > testing/bsps/beagleboardxm.mc > > It took us a while to get a stable way to force a full reset on the xM's > ARM. It takes about 3 hours to run all 500 tests. > > If you get a working configuration please send me a patch. Hard coded > paths are ok at this stage of the rtems-test's development. I am yet to > figure out a way to manage the host variations. > > Chris > > _______________________________________________ > rtems-devel mailing list > [email protected] > http://www.rtems.org/mailman/listinfo/rtems-devel >
_______________________________________________ rtems-devel mailing list [email protected] http://www.rtems.org/mailman/listinfo/rtems-devel
