One more thing, can you place a "sleep 1" before you do your final "rtroute" call to display the routing information? rtroute solicit does not wait for any response, it just sends out the ARP request messages. If you have a very fast PC it might be that the ARP responses from your connected device have not been received yet when you do your final "rtroute" call. What does "dmesg" tell you?
Regards Mathias > Hi Leo, > > what happens if you do not use "rtlo" at all? > I think it is not required if you want to communicate via rteth0 only. > However, it is strange how it behaves... > > Regards > > Mathias > > > Hi, > > > > I know that this issue have been treated before but I'm having a trouble > and > > I > > don't know how to solve. I have a box with a xenomai-2.6.23 with > > rtnet-trunk. > > I have one network card that I want to use in rtnet (rteth0). I don't > want > > to > > use tdma. I have this script to load rtnet: > > > > ---------------------------------------------------------------------- > > #!/bin/sh > > sudo mknod /dev/rtnet c 10 240; > > sudo insmod modules/rtnet.ko; > > sudo insmod modules/rtipv4.ko; > > sudo insmod modules/rtpacket.ko; > > sudo insmod modules/rt_e1000.ko; > > sudo insmod modules/rt_loopback.ko; > > sudo ./sbin/rtifconfig rtlo up 127.0.0.1 > > sudo ./sbin/rtifconfig rteth0 up 10.0.0.1 netmask 255.255.255.0; > > for((i=0;i<5;i++)); do > > ./sbin/rtroute solicit 10.0.0.$i dev rteth0 > > done > > sudo ./sbin/rtroute > > ---------------------------------------------------------------------- > > > > I cannot understand why, when I run the rtroute at the end, I got this: > > > > Host Routing Table > > Hash Destination HW Address Device > > 00 0.0.0.0 00:00:00:00:00:00 rtlo > > 01 10.0.0.1 00:00:00:00:00:00 rtlo > > 01 127.0.0.1 00:00:00:00:00:00 rtlo > > 3F 10.0.0.255 FF:FF:FF:FF:FF:FF rteth0 > > > > the second entry.... > > > > I don't have assigned that 10.0.0.1 to rtlo. I have assigned it to rteth0 > > and > > the routes attached to it. So, I cannot make a simple ping to 10.0.0.2, I > > > got: > > $ sudo sbin/rtping 10.0.0.2 > > Real-time PING 10.0.0.2 56(84) bytes of data. > > ioctl: No route to host > > > > however I must do it explicit: > > sudo ./sbin/rtroute add 10.0.0.2 00:1B:21:05:0C:B6 dev rteth0 > > > > then > > Host Routing Table > > Hash Destination HW Address Device > > 00 0.0.0.0 00:00:00:00:00:00 rtlo > > 01 10.0.0.1 00:00:00:00:00:00 rtlo > > 01 127.0.0.1 00:00:00:00:00:00 rtlo > > 02 10.0.0.2 00:1B:21:05:0C:B6 rteth0 > > 3F 10.0.0.255 FF:FF:FF:FF:FF:FF rteth0 > > > > en then I can do a rtping ... > > > > no success because I think that my vxworks controller is missconfigured, > but > > I > > got: > > > > sudo ./sbin/rtping 10.0.0.2 > > Real-time PING 10.0.0.2 56(84) bytes of data. > > > > and the leds of the card are blinking > > > > someone can tell me why this behaviour? I have read the readmes but or I > > don't > > understand then, but I don't find my mistake. > > > > Regards, > > > > Leo > > > > -- > Mathias Koehrer > [EMAIL PROTECTED] > > > Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren > ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT FÜR ALLE NEUEINSTEIGER > Jetzt bei Arcor: günstig und schnell mit DSL - das All-Inclusive-Paket > für clevere Doppel-Sparer, nur 29,95 inkl. DSL- und ISDN-Grundgebühr! > http://www.arcor.de/rd/emf-dsl-2 > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > RTnet-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/rtnet-users > -- Mathias Koehrer [EMAIL PROTECTED] Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT FÜR ALLE NEUEINSTEIGER Jetzt bei Arcor: günstig und schnell mit DSL - das All-Inclusive-Paket für clevere Doppel-Sparer, nur 29,95 inkl. DSL- und ISDN-Grundgebühr! http://www.arcor.de/rd/emf-dsl-2 ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ RTnet-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/rtnet-users
