A Dilluns 19 Novembre 2007, Jan Kiszka va escriure: > Leopold Palomo-Avellaneda wrote: > > A Dilluns 19 Novembre 2007, Jan Kiszka va escriure: > >> Leopold Palomo-Avellaneda wrote: > >>> Hi, > >>> > >>> after recompiling the kernel (2.6.23) and xenomai (trunk) and rtnet > >>> (trunk) I'm having the same problems. So, I would like to delimite > >>> them. Trying to use the rtcap, I got that wireshark doesn't see it. I > >>> have done the following steps. Please could you look it if I'm missing > >>> something obvious? > >>> > >>> mknod /dev/rtnet c 10 240; > >>> insmod modules/rtnet.ko; > >>> insmod modules/rtipv4.ko; > >>> insmod modules/rtpacket.ko; > >>> insmod modules/rt_e1000.ko; > >>> insmod modules/rtcap.ko; > >>> sudo ./sbin/rtifconfig rteth0 up 10.0.0.1 promisc netmask > >>> 255.255.255.0; > >>> > >>> doing this if I run wireshark, rteth0 doesn¡t appears as interface. I > >>> can see only eth1 , lo and any. > >>> > >>> Please, > >>> what I'm doing wrong? > >> > >> ifconfig rteth0 up > >> etc. > >> (the RTcap sniffing interfaces show up as a pseudo network devices under > >> Linux). > >> > > :-( > > > > please Jan, could you add this sentence to the readme.rtcap > > documentation? > > Clarification patches to the doc will be happily accepted! :) >
Jan, please could add this piece of text to the README.rtcap? As a summary when you try to use rtcap the main steps are: - compile rtnet adding the --eneable-rtcat to the configure when you use it, - load the modules rtnet, rtipv4, rtpacket. - load the driver you use (rt_e1000, rt_8139too, ...) - load the rtcap module - configure your rtnet interface with the prosic flag (ex. rtifconfig rteth0 up 10.0.0.1 promisc netmask 255.255.255.0) - make if visible to your favourite capturing tool using ifconfig (ex. ifconfig rteth0 up) Now, you can see it as a _normal_ network interface. Regards, Leo ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ RTnet-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/rtnet-users
