Dear Mailing List, System: OpenSuse 11.2 => Kernel: 2.6.31.8 => Real Time Extension: RTAI 3.8 => Rtnet 0.9.12 Hardware: Computer1 Network Controller: Realtek RTL-8169 Computer2 Network Controller: Intel pro/1000 GT 82541PI My problem is while the startup. If I use the Network Controller Realtek RTL-8169 as Master and the Network Controller Intel pro/1000 as slave there are no problems. However by the time I switch the role of both Network Controllers (Intel pro/1000 = MASTER, Realtek RTL-8169 = SLAVE), I get only the terminal messages: Waiting for all slaves… AND Stage 1: searching for master… Stage 2: waiting for other slave… Stage 3: waiting for common setup completion… Both Computers are returning, but they don’t send synchronisation messages. I suspected it depends on the network controller “Intel pro/1000”. As result of this, I tried to use the module rt_e1000_new instead of rt_e1000 but without success. Here are the configurations I use while the installation (for Intel pro/1000): ./configure --with-rtext=/usr/realtime --with-linux=/usr/i586-suse-linux --with-rtext-config=/usr/realtime/bin/rtai-config --prefix=/usr/realtime/rtnet --enable-udp --enable-examples --enable-rtcap Thanks for help Kind Regards Sebastian
|
------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________ RTnet-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/rtnet-users
