With all the recent posts about Kinsman, I thought the group might be interested in a set of photos I made of the construction (including the instructions being shown in two of the photos) of a Kinsman ACL potash carrier.
I enjoyed making this model and considered the isometric instruction drawing combined with the colour coding of the strip wood to be very helpful. It is difficult here to get authentic railroad paints, so this model is painted using burnt umber acrylic. I also use coins as weights and am fortunate to have a large number commerative ones that have no monetary value. Raymond Hall, Holywood Co.Down. http://www.flickr.com/photos/77959295@N07/sets/72157631896983331/ ----- Original Message ----- From: Bob McCarthy To: [email protected] Sent: Wednesday, October 31, 2012 6:24 PM Subject: Re: {S-Scale List} Kinsman updated in many cases not possible because they are not correct Tom, The KINSMAN SF boxcar kits are fun to build, but just be aware of the fact that they are too low and the ends are wrong for thre ar they claim to be. The GEORGIA and FLORIDA will be receiving delivery of my SF faux boxcar shortly, since I do not label cars for what they are not. The kit goes together fairly quickly and with very little work the doors can be made to function. Bob ------------------------------------------------------------------------------ From: Thomas Baker <[email protected]> To: "[email protected]" <[email protected]> Sent: Tuesday, October 30, 2012 11:10 PM Subject: RE: {S-Scale List} Kinsman updated in many cases not possible because they are not correct Roger, Challenge for sure! I have three of them but have not summoned the courage to assemble them. Tom ------------------------------------------------------------------------------ From: [email protected] [[email protected]] on behalf of Roger Nulton [[email protected]] Sent: Tuesday, October 30, 2012 7:53 PM To: [email protected] Subject: Re: {S-Scale List} Kinsman updated in many cases not possible because they are not correct OK, Bob. I’ll fess up: not all of my models are “contest quality”<g>. I still have a Kinsman Santa Fe panel auto box. Is that the one that is the wrong size? I have 2 built up and I love them! I also have 2 Scenery Unlimited resin USRA boxcars, if you want a real challenge. Roger From: Bob McCarthy Sent: Tuesday, October 30, 2012 3:07 PM To: [email protected] Subject: Re: {S-Scale List} Kinsman updated in many cases not possible because they are not correct Roger, Pete Silcox told me about 'three foot models', they look good from 3 feet in a train, but are not of model contest quality. Even in 'three foot models' it is preferable to have the car or structure represent what it is supposed to be even if it does n ot have every rivet. Bob ------------------------------------------------------------------------------ From: Roger Nulton <[email protected]> To: [email protected] Sent: Tuesday, October 30, 2012 5:59 PM Subject: Re: {S-Scale List} Kinsman updated in many cases not possible because they are not correct [1 Attachment] Thanks, Bob. One of my favorites is the composite hopper. I like the individual wood boards for the sides: something that can’t be duplicated in plastic or brass as well. I built my first hopper at about age 15 in 1963. I saved it and run it on the layout because you can’t see its flaws at 3 feet away like you can in this photo. Some of my earlier efforts though were trashed, you could see the problems from across the room! Roger From: Bob McCarthy Sent: Monday, October 29, 2012 9:42 PM To: [email protected] Subject: Re: {S-Scale List} Kinsman updated in many cases not possible because they are not correct Roger, There was no fault on your part.� KINSMAN kits are just what they are. Bob ________________________________ From: Roger Nulton <mailto:roger.nulton%40comcast.net> To: mailto:S-Scale%40yahoogroups.com Sent: Monday, October 29, 2012 7:35 PM Subject: Re: {S-Scale List} Kinsman updated in many cases not possible because they are not correct Bob, It’s great to know that my kits are being built instead of in a holding pattern under my layout. Sorry I sold you an unprototypical car: it was not intentional! I still have many more unbuilt kits that I dream of completing, but am finally beginning to accept that I need no more freight cars on my layout. Roger Nulton
