----- Original Message -----
From: cnr3304
> > After-market scale wheels ? ?
If Lionel won't come out with scale drivers, a person could always do what
HOer's did in the past with Rivarossi flanges. Turn the loco over, run it at
medium speed and carefully use a mill file, checking with your NASG gauge as
you go.
> > > > > > > > > > > > >
Interesting idea. I looked at the highrail wheels that came with my U33C
and the flange was very close to what we call scale. Not much turning would
be required. But the wheel-to-wheel measurement (check-gauge) was way off,
too close.
And if I were turning down wheel flanges, I think I'd try to get the
wheelsets out of the truck somehow to keep the filings out of the gears.
tom Hawley -- Lansing Mich
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
