Ahh not correct Deep Flange is High-rail Course is the old standards that have been superseded. Think code 100 is H0. The old standard was for code 124 wheels. The Deep flange stnd is code 172.
Also code 88 wheels wont work on P64 or any other Proto track. The flanges wont pass the flangeway. That 'poor profile' you mention is RP25 and the reason for my above comment. RP25 is a good profile but it is not true to scale. It is designed to allow interchange without regard to rail contour. P64 requires a certain rail contour and does not tolerate any wheel but P64. If a 'better' wheel profile was specked in RP25 you would not be able to mix wheels as you do now. Talmadge C 'TC' Carr Sn42 and Hn42 somewhere in the wilds of the Pacific Northwest [email protected] On Jul 6, 2013, at 4:46 AM, Simon wrote: > coarse (deep flange) > Sure, some people are using code 88 wheels, some on fine track alongside code > 110 wheels, some alongside P64, because they're almost the correct scale > width over the whole tyre (despite a poor profile) ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
