Seems like many years ago I did one by unsoldering the worm from the armature shaft, and used a short section of K&S brass tubing the right diameter that would just slip over the shaft. I used a small needle file to enlarge the area for the tube, filing downward so that the mesh of the worm and the gear was correct.
Regard'S' Smitty S-Trains list sponsor: http://www.americanflyertrains.com All the Flyer you desire...books and accessories too! To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
