In Gabe, could I upgrade the wire for the coil winding with a better (thicker) wire coil to prevent overheat and produce more current and therefore stronger plunger action?
What type of wire would be recommended - Gauge and such? Again, like the coal loader - final assembly by the customer required! Scott Dee -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 19, 2003 10:14 PM To: [EMAIL PROTECTED] Subject: [S-Trains] MTH/Lionel accessories I have used both of these makers with a Gabe and with a sawmill. The MTH Gabe seems to be the better of the two, but it too has drawbacks. I think the coils in both of these are too light and fragile. After my Grandson has pounded the MTH ceaselessly for 15 minutes or so it starts slowing down and skipping a step now and then. The Lionel seem to fail even sooner. It's just plain old electrical engineering I think. The coils heat up, the resistance goes up, less current to activate the action and failure on the horizon. As to the Lionel 772 water tower, what perverted troll dreamed up the amber water tube? Looks more like sewage than water. I was duped because the catalog shows it as a clear tube ALA the original Gilbert. I quickly sold mine and bought a "Gilbert Reproductions" model. Almost dead on to the original except the gray color of the base is slightly darker. There's my experience andHO Steve [Non-text portions of this message have been removed] S-Trains list sponsor: http://www.americanflyertrains.com All the Flyer you desire...books and accessories too! To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ S-Trains list sponsor: http://www.americanflyertrains.com All the Flyer you desire...books and accessories too! To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
