Hey Kiran, Can you run sage -t -verbose devel/sage-main/sage/dsage/tests/ and attach the output of that?
Thanks, Yi On Fri, Mar 28, 2008 at 11:01 PM, Kiran Kedlaya <[EMAIL PROTECTED]> wrote: > > Am I first to respond? w00t! But I have an unfair advantage this week, > being in an unusual time zone (India). > > Anyway, on 64-bit RH (Opteron), I get one doctest failure (not in > parallel): > > sage -t devel/sage-main/sage/dsage/tests/testdoc.py > > which fails as follows: > ----- > sage -t devel/sage-main/sage/dsage/tests/testdoc.py Exception > exceptions.TypeError: TypeError("'NoneType' object is not callable",) > in <bound method Popen.__del__ of <subprocess.Popen object at > 0x1bb1a850>> ignored > Exception in thread Thread-1 (most likely raised during interpreter > shutdown): > Traceback (most recent call last): > File "/scratch/sage-2.11.alpha2/local/lib/python2.5/threading.py", > line 460, in __bootstrap > File "/scratch/sage-2.11.alpha2/local/lib/python2.5/site-packages/ > sage/dsage/interface/dsage_interface.py", line 46, in run > File "/scratch/sage-2.11.alpha2/local/lib/python2.5/site-packages/ > twisted/internet/posixbase.py", line 220, in run > File "/scratch/sage-2.11.alpha2/local/lib/python2.5/site-packages/ > twisted/internet/posixbase.py", line 233, in mainLoop > <type 'exceptions.AttributeError'>: 'NoneType' object has no attribute > 'msg' > Unhandled exception in thread started by > Error in sys.excepthook: > > Original exception was: > > [17.3 s] > exit code: 1024 > ----- > Kiran > > > > mabshoff wrote: > > > Hello folks, > > > > this is 2.11.alpha2. It is a little later than I had hoped and > > planned mostly due to the fact that Easter and Spring break > > put somewhat of a damper on development. So far we merged 111 > > patches into this release. > > > > There were fixes all over the map. This build should now also > > build fine on OSX 10.5.2 and higher. If you had some major > > feature merged in this release please add some info about it > > at the "Sage 2.11 Release Tour" wiki page located at > > > > http://wiki.sagemath.org/sage-2.11 > > > > This is likely the last release before 2.11.final unless we > > hit some major show stopper. Please build, doctest and report > > any issue you hit in this thread. But I am sure by now you > > know the drill :=) > > > > Please also correct and spelling issues as well as wrongly > > assigned credit in the list below. > > > > Cheers, > > > > Michael > > > > > > Merged in alpha2: > > > > #1010: Marshall Hampton: upgrade gfan to version 0.3 > > #1618: Michael Abshoff: Make SCons ignore Intel ifort's > > linker options > > #1707: Carlo Hamalainen: add Carlo Hamalainen's latin square > > stuff to Sage > > #2276: Martin Albrecht: M.divides(N) gives an error if M and > > N are monomials in R.<x,y> = PolynomialRing(QQ) > > #2355: Didier Deshommes, Gary Furnish: Write a clearer > > submatrix implementation > > #2415: Michael Abshoff: update NTL to 5.4.2 (bugfix release) > > #2417: Alex Ghitza: discriminant method sometimes returns > > values in the fraction field > > #2470: Yi Qiang: dsage docs in tutorial -- can't tex them > > #2498: Alex Ghitza: PARI's is_irreducible being used > > inappropriately > > #2565: Dan Drake: logging is extremely broken > > #2596: William Stein: Sage 2.11.alpha0: sage/plot/plot.py > > doctest failure > > #2597: Ryan HintonAdd reduced adjacency matrix and a list > > file format support to BipartiteGraph > > #2600: Carl Witty: vector plot throws error when function > > contains a float > > #2609: Robert Miller: generators for congruence subgroups > > #2611: Martin Albrecht: add monomial_coefficent to boolean > > polynomials > > #2612: Robert Bradshaw: String to Integer Conversion > > #2614: Joel Mohler: MPolynomial coefficient/ > > polynomial_coefficient merging > > #2627: Robert Bradshaw: Integer(abs(gamma(n+1))) is not always > > equal to factorial(n) for n a positive integer > > #2634: Martin Albrecht: Unable to create certain multivariate > > polynomial rings since libsingular is invoked instead > > of generic code > > #2642: Martin Albrecht, Carl Witty: doctest failure in > > polynomial_modn_dense_ntl.pyx: .small_roots() > > #2645: Jason Grout: arrow3d is sometimes too long > > #2653: Robert Bradshaw: norm and trace of elements of orders > > are Rational not Integer > > #2657: Tim Abbott: Debian fplll cleanup > > #2660: Michael Abshoff: copy work around stdint.h on Solaris 9 > > #2661: Mike Hansen: sage cannot compute floor / ceil of > > log(8)/log(2) > > #2664: Nick Alexander: implement a symplectic form for > > finding symplectic bases > > #2668: Nick Alexander, Carl Witty: loads/dumps do not work > > with QQbar and AA > > #2672: Michael Abshoff: Fix OSX 10.5 detection code - it > > fails for the currect OSX 10.5.2 > > #2674: Craig Citro, Justin Walker: Bug in modforms > > #2676: Robert Miller: equitable partitions: two bugs > > #2677: Didier Deshommes: sage 2.11.alpha1: doctest failures > > in real_double_dense.pyx > > #2681: Alex Ghitza:improve doctest coverage in libs/pari/gen.pyx > > #2683: Mike Hansen: Add initial support of k-Schur functions > > #2685: Robert Miller: compute the girth of a graph > > #2689: Robert Miller: compute blocks and cut-vertices of a > > graph > > #2690: Emily Kirkman: add circular argument to genus command > > #2691: Robert Miller: generate digraphs > > #2692: William Stein: bug displaying list of published worksheets > > #2701: David Joyner: simple bug fixed for linear_codes > > #2706: Robert Bradshaw: Fast bitset implimentation > > #2707: Nick Alexander: clean and better document > > is_totally_real(), add is_totally_imaginary() to > > NumberField_generic > > #2708: Mike Hansen: add support for nonsymmetric Macdonald > > polynomials in type A via HHL formula > > #2712: Justin Walker: Add 'scalar_part()' and other methods > > for quaternion elements > > > > Merged in alpha1: > > > > #291: Joel Mohler: strange printing of -1 in multivariate > > polynomial rings > > #679: Gary Furnish: print statistics about the number of > > failed doctests and exact nature of failures > > #2287: Michael Abshoff: error installing rubiks related > > to location of install > > #2493: Jaap Spies: Updated experimental vtk spkg > > (vtk-5.0.4.spkg) > > #2495: Jaap Spies: Updated experimental Mayavi2 spkg > > (mayavi_2.1.1) linux only > > #2514: David Joyner, Robert Miller: additions to coding > > modules > > #2572: Carl Witty: imag() not defined for Algebraic Real > > Field > > #2586: Alex Ghitza, Michael Abshoff: latex products need > > to be space separated > > #2595: Michael Abshoff: rubiks and polymake both have a > > cube binary > > #2598: Martin Albrecht: allow ZZ element to be constructed > > from GF(2) list > > #2599: Mike Hansen: Permutation -> PermutationGroupElement > > fails for the identity > > #2613: Michael Kallweit: Moving all_paths() to GenericGraph > > #2618: Martin Albrecht: documentation for QuotientRingElement > > #2619: Martin Albrecht: Gr�bner bases over quotient rings > > > > #2621: Gary Furnish: parallel doctest: concurrency problem > > when creating .doctest directories > > #2622: Martin Albrecht: add PolyBoRi to reference manual > > #2623: Michael Abshoff: fix repo consistency issue with > > sage/schemes/hyperelliptic_curves/hypellfrob/README > > #2626: Martin Albrecht: useless __list__ methods > > #2635: Tom Boothby: MAJOR NOTEBOOK BUG -- sending unevaluated > > cells back to the server is severly broken > > #2639: Carl Witty: ZZ(QQbar(0)) fails > > #2640: Michael Abshoff: add sage-edu to list of mailing lists > > #2644: Didier Deshommes: fix numerical noise doctest failures > > in matrix_real_double_dense > > #2647: Tim Abbott: Fixed Debian support for linbox > > #2648: William Stein: bug in octave version > > > > Merged in alpha0: > > > > #1567: David Harvey: Make zn_poly a standard package > > #1568: David Harvey: hypellfrob -- faster zeta functions for > > hyperelliptic curves > > #2108: Burcin Erocal, Michael Abshoff: Add Atlas Tuning > > information for 32 bit Pentium D CPUs under Linux > > #2148: Burcin Erocal: PolyBoRi monomial orders are wrong > > #2260: Michael Abshoff: Upgrade ATLAS to 3.8.1 > > #2262: Michael Abshoff: Move the debian directory from the sage > > to the ext repo > > #2368: Michael Abshoff: Add Atlas Tuning information for G4 > > Powerbook under Linux > > #2405: Joel Mohler: increase Polydict speed > > #2424: Martin Albrecht: small roots method for polynomials > > mod N (N composite) > > #2426: Michael Abshoff: inst.tex - update compiler and > > operating system support > > #2431: Marshall Hampton: fix optional polymake-2.2.p4.spkg > > #2437: Tom Boothby, Michael Abshoff: update eclib.spkg to > > eclib-20080304.p0 > > #2468: Didier Deshommes: inverting a non-invertible matrix over > > RDF returns weird results > > #2517: Jason Grout: ignore bad values in plot > > #2545: Burcin Erocal: FractionFieldElement lacks derivative method > > #2566: Robert Miller: fix all known bugs in graph_isom and > > binary_code > > #2571: John Cremona: problem with copy() on > > sage.rings.integer_mod.IntegerMod_gmp > > #2574: David Joyner: problem with Abelian groups and trivial > > elements > > #2576: William Stein: preserve docstrings of decorated methods > > in multi_polynomial_ideal.py > > #2579: R. Rishikesh: Inconsistency in integer quotient > > #2580: Robert Miller: Implement backends for graphs > > #2581: William Stein: extend solve_right to all cases; implement > > solve_left > > #2582: Robert Miller: fix bug in PermutationGroupElement > > #2583: Robert Miller: Sage 2.11.a0: doctest failure in plot.py > > due to #2580 > > #2584: Jason Grout, Mike Hansen: printing bug with list_function()) > > #2585: David Roe, Mike Hansen: padic bugfix for check=False in > > constructor > > #2587: Robert Miller: subgroup of a permutation group is so slow > > it's silly > > #2588: Nick Alexander: documentation and tests for > > sage.schemes.hyperelliptic_curves.jacobian_morphism > > #2593: Martin Albrecht: Sage chokes on utf-8 in .sage files > > #2594: Joel Mohler: MPolynomial_polydict __floordiv__ wrong > > arithmetic > > #2602: Jason Grout: plot_vector_field docs are unnecessarily > > complicated (and use the slow lambda functions!) > > #2610: Lars Fischer, Michael Abshoff: Website: add missing > > line for emacs config > > > --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to sage-devel@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-devel URLs: http://www.sagemath.org -~----------~----~----~----~------~----~------~--~---