Thanks, I have ads blocked, fairly sure that none were playing any U-tube or other graphics, no adobe flash. Looking at System monitor, barely a Gig of memory is being used and swap is NOT being used at all. There is 4 Gig of ram. CPU #2 is running at 100% most of the time during the atlas build, CPU #1 sometimes goes to 96% at the same time that #2 is at 100% - so I'm GUESSING that Atlas is CPU bound and I assume it SHOULD BE during the timing tests ?
I'm trying to find out what the Atlas build errors 2 and 255 mean, hopefully that will lead me somewhere ? (-: On Nov 5, 1:38 pm, mhampton <hampto...@gmail.com> wrote: > Depending on what those Firefox tabs were, they could have put a > significant load on your CPU (Flash ads for example) or used enough > memory to make atlas work too hard. It would be interesting to know > if it works if you aren't running anything else. > > What is your processor and amount of RAM? > > -M. Hampton > > On Nov 5, 9:12 am, RegB <2regburg...@earthlink.net> wrote: > > > WOW, that was quick - THANKS. > > I reviewed all of those and while interesting/useful they seem to be > > not applicable to this particular failure. > > > I had meant to say that on previous attempts I had discovered the need > > for a fortran compiler and to disable cpu throttling. Also the > > desirability of installing LaTeX, so I did those. > > This is a very lightly loaded system, i,e, it is my personal laptop > > and about the only other thing it was doing at the time of failure was > > running Firefox with 1/2 dozen tabs open. > > > Thanks again, I will try it all over again. > > > Minh Nguyen wrote: > > > Hi, > > > > On Sat, Nov 6, 2010 at 12:30 AM, RegB <2regburg...@earthlink.net> wrote: > > > > I know this is a modest laptop, but it seems to be in the tuning > > > > section that the Atlas install fails after 12 hours or so. > > > > You might want to read this section of the Sage FAQ: > > > >http://www.sagemath.org/doc/faq/faq-usage.html#when-i-compile-sage-my... > > > > -- > > > Regards > > > Minh Van Nguyen -- To post to this group, send an email to sage-devel@googlegroups.com To unsubscribe from this group, send an email to sage-devel+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/sage-devel URL: http://www.sagemath.org