Are you sure to use SNMPv1?
If you look at an SNMPv1 trap it has the following "fields":
Enterprise (sender OID)
Agent IP address (sender IP)
(the data part is an SNMP sequence):
OID
Value
In SNMPv2 you will NOT see the enterprise and agentIP.
Dirk.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Dirk Bulinckx
Sent: Monday, June 07, 2004 7:41 PM
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView
So must I understand from this that HPOV is not looking at the objectID but
at the OID of the sender instead?
That doesn't sound right to me. The sender OID is an OID that just has to
show who is sending not what is exactly send.
Dirk.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of iPrimus NMC
Sent: Monday, June 07, 2004 6:49 PM
To: [EMAIL PROTECTED]
Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView
Dirk,
The down event Object ID is set to 1.3.6.1.4.1.10984.0.1 with object value
%p is %s [%e] and the Up event Object ID to 1.3.6.1.4.1.10984.0.2 with
object value %p is %s. Both alarms produce a Major alarm and HPOV indicates
that the "specific trap" value is 0 in both cases.
Steve
----- Original Message -----
From: "Dirk Bulinckx" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 08, 2004 2:20 AM
Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView
> The sender OID is just an indication on what system is sending the trap
> (together with the IP of the sender), the actual info should be done with
> the "object OID" and "object value" which are set within the alert
> definition.
>
>
> Dirk.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> Of iPrimus NMC
> Sent: Monday, June 07, 2004 5:59 PM
> To: [EMAIL PROTECTED]
> Subject: [SA-list] sending SNMP trap alerts to HP OpenView
>
> Hello,
>
> I have setup SA to send SNMP traps to our HPOV central monitoring system.
> The Sender OID is 1.3.6.1.4.1.10984 as per the SA manual using SNMPv1.
>
> SA successfully sends alert traps for down and up events that however
> produce the same alarm severity (Major) at the HPOV alarm browser. We
> require SA down events to generate HPOV Major alarms and up events to
> generate Normal alarms.
>
> HPOV is using event identifier .1.3.6.1.4.1.10984.0.1 for down events and
> 1.3.6.1.4.1.10984.0.2 for up/normal events.
>
> How do I need to setup SA/HPOV for this to work as required.
>
>
> Regards
> Steve Wright
> Primus Telecomunications
>
> ---
>
> [This E-mail scanned for viruses by Declude Virus]
>
> To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> With the following in the body of the message:
> unsubscribe SAlive
>
>
>
> ---
>
> [This E-mail scanned for viruses by Declude Virus]
>
> To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> With the following in the body of the message:
> unsubscribe SAlive
>
--------------
[This E-mail scanned for viruses by Declude Virus]
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
--------------
[This E-mail scanned for viruses by Declude Virus]
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
--------------
[This E-mail scanned for viruses by Declude Virus]
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
