Dirk, Thanks for the screenshot. I will investigate further.
----- Original Message ----- From: "Dirk Bulinckx" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 08, 2004 4:52 AM Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > I've send you off-list an JPG showing a trap send by Servers Alive and as > you can see the senderOID AND the OID (from the alert screen) are both > within the trap. (jpg is a netmon screenshot). > > My guess is that HPOV is interpreting some of the OIDs it's getting. Maybe > HPOV does accept snmpv1 traps but uses them as snmpv2 traps and as such is > not seeing the senderOID/IP? > Also adding the .0.0 at the send seems odd.... > > > > Dirk. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of iPrimus NMC > Sent: Monday, June 07, 2004 8:42 PM > To: [EMAIL PROTECTED] > Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView > > Dirk, > > sorry I don't have either of these units here at present (its 4:30am) but > should be able to arrange within 24hours. I will sniff the SNMP transaction > and advise. > > Steve > ----- Original Message ----- > From: "Dirk Bulinckx" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, June 08, 2004 4:28 AM > Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > > > > If you have a sniifer (netmon or ethereal) then capture the packet send by > > SA and look at what is send.... > > > > > > Dirk. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf > > Of iPrimus NMC > > Sent: Monday, June 07, 2004 8:22 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView > > > > Dirk, > > > > I have just tried setting the sender OID to 1.3.6.1.4.1.10984.0.1 and > > 1.3.6.1.4.1.10984.0.2 and HPOV tells me that it received > > 1.3.6.1.4.1.10984.0.1.0.0 and 1.3.6.1.4.1.10984.0.2.0.0 when I press the > > 'Test It' button. > > > > Based on this result I tried setting the sender OID to > 1.3.6.1.4.1.10984.0.0 > > and the Object ID to 1.3.6.1.4.1.10984.0.0.0.1 and > 1.3.6.1.4.1.10984.0.0.0.2 > > to no effect. > > > > Steve > > > > > > ----- Original Message ----- > > From: "Dirk Bulinckx" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, June 08, 2004 3:40 AM > > Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > > > > > > > So must I understand from this that HPOV is not looking at the objectID > > but > > > at the OID of the sender instead? > > > That doesn't sound right to me. The sender OID is an OID that just has > to > > > show who is sending not what is exactly send. > > > > > > > > > Dirk. > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf > > > Of iPrimus NMC > > > Sent: Monday, June 07, 2004 6:49 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView > > > > > > Dirk, > > > > > > The down event Object ID is set to 1.3.6.1.4.1.10984.0.1 with object > value > > > %p is %s [%e] and the Up event Object ID to 1.3.6.1.4.1.10984.0.2 with > > > object value %p is %s. Both alarms produce a Major alarm and HPOV > > indicates > > > that the "specific trap" value is 0 in both cases. > > > > > > Steve > > > > > > ----- Original Message ----- > > > From: "Dirk Bulinckx" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, June 08, 2004 2:20 AM > > > Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > > > > > > > > > > The sender OID is just an indication on what system is sending the > trap > > > > (together with the IP of the sender), the actual info should be done > > with > > > > the "object OID" and "object value" which are set within the alert > > > > definition. > > > > > > > > > > > > Dirk. > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > > Behalf > > > > Of iPrimus NMC > > > > Sent: Monday, June 07, 2004 5:59 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: [SA-list] sending SNMP trap alerts to HP OpenView > > > > > > > > Hello, > > > > > > > > I have setup SA to send SNMP traps to our HPOV central monitoring > > system. > > > > The Sender OID is 1.3.6.1.4.1.10984 as per the SA manual using SNMPv1. > > > > > > > > SA successfully sends alert traps for down and up events that however > > > > produce the same alarm severity (Major) at the HPOV alarm browser. We > > > > require SA down events to generate HPOV Major alarms and up events to > > > > generate Normal alarms. > > > > > > > > HPOV is using event identifier .1.3.6.1.4.1.10984.0.1 for down events > > and > > > > 1.3.6.1.4.1.10984.0.2 for up/normal events. > > > > > > > > How do I need to setup SA/HPOV for this to work as required. > > > > > > > > > > > > Regards > > > > Steve Wright > > > > Primus Telecomunications > > > > > > > > --- > > > > > > > > [This E-mail scanned for viruses by Declude Virus] > > > > > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > > > With the following in the body of the message: > > > > unsubscribe SAlive > > > > > > > > > > > > > > > > --- > > > > > > > > [This E-mail scanned for viruses by Declude Virus] > > > > > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > > > With the following in the body of the message: > > > > unsubscribe SAlive > > > > > > > > > > > > > -------------- > > > > > > [This E-mail scanned for viruses by Declude Virus] > > > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > > With the following in the body of the message: > > > unsubscribe SAlive > > > > > > > > > > > > > > > -------------- > > > > > > [This E-mail scanned for viruses by Declude Virus] > > > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > > With the following in the body of the message: > > > unsubscribe SAlive > > > > > > > > > -------------- > > > > [This E-mail scanned for viruses by Declude Virus] > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > With the following in the body of the message: > > unsubscribe SAlive > > > > > > > > > > -------------- > > > > [This E-mail scanned for viruses by Declude Virus] > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > With the following in the body of the message: > > unsubscribe SAlive > > > > > -------------- > > [This E-mail scanned for viruses by Declude Virus] > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > With the following in the body of the message: > unsubscribe SAlive > > > > > -------------- > > [This E-mail scanned for viruses by Declude Virus] > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > With the following in the body of the message: > unsubscribe SAlive > -------------- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
