I've send you off-list an JPG showing a trap send by Servers Alive and as you can see the senderOID AND the OID (from the alert screen) are both within the trap. (jpg is a netmon screenshot).
My guess is that HPOV is interpreting some of the OIDs it's getting. Maybe HPOV does accept snmpv1 traps but uses them as snmpv2 traps and as such is not seeing the senderOID/IP? Also adding the .0.0 at the send seems odd.... Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of iPrimus NMC Sent: Monday, June 07, 2004 8:42 PM To: [EMAIL PROTECTED] Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView Dirk, sorry I don't have either of these units here at present (its 4:30am) but should be able to arrange within 24hours. I will sniff the SNMP transaction and advise. Steve ----- Original Message ----- From: "Dirk Bulinckx" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 08, 2004 4:28 AM Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > If you have a sniifer (netmon or ethereal) then capture the packet send by > SA and look at what is send.... > > > Dirk. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of iPrimus NMC > Sent: Monday, June 07, 2004 8:22 PM > To: [EMAIL PROTECTED] > Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView > > Dirk, > > I have just tried setting the sender OID to 1.3.6.1.4.1.10984.0.1 and > 1.3.6.1.4.1.10984.0.2 and HPOV tells me that it received > 1.3.6.1.4.1.10984.0.1.0.0 and 1.3.6.1.4.1.10984.0.2.0.0 when I press the > 'Test It' button. > > Based on this result I tried setting the sender OID to 1.3.6.1.4.1.10984.0.0 > and the Object ID to 1.3.6.1.4.1.10984.0.0.0.1 and 1.3.6.1.4.1.10984.0.0.0.2 > to no effect. > > Steve > > > ----- Original Message ----- > From: "Dirk Bulinckx" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, June 08, 2004 3:40 AM > Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > > > > So must I understand from this that HPOV is not looking at the objectID > but > > at the OID of the sender instead? > > That doesn't sound right to me. The sender OID is an OID that just has to > > show who is sending not what is exactly send. > > > > > > Dirk. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf > > Of iPrimus NMC > > Sent: Monday, June 07, 2004 6:49 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView > > > > Dirk, > > > > The down event Object ID is set to 1.3.6.1.4.1.10984.0.1 with object value > > %p is %s [%e] and the Up event Object ID to 1.3.6.1.4.1.10984.0.2 with > > object value %p is %s. Both alarms produce a Major alarm and HPOV > indicates > > that the "specific trap" value is 0 in both cases. > > > > Steve > > > > ----- Original Message ----- > > From: "Dirk Bulinckx" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, June 08, 2004 2:20 AM > > Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView > > > > > > > The sender OID is just an indication on what system is sending the trap > > > (together with the IP of the sender), the actual info should be done > with > > > the "object OID" and "object value" which are set within the alert > > > definition. > > > > > > > > > Dirk. > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf > > > Of iPrimus NMC > > > Sent: Monday, June 07, 2004 5:59 PM > > > To: [EMAIL PROTECTED] > > > Subject: [SA-list] sending SNMP trap alerts to HP OpenView > > > > > > Hello, > > > > > > I have setup SA to send SNMP traps to our HPOV central monitoring > system. > > > The Sender OID is 1.3.6.1.4.1.10984 as per the SA manual using SNMPv1. > > > > > > SA successfully sends alert traps for down and up events that however > > > produce the same alarm severity (Major) at the HPOV alarm browser. We > > > require SA down events to generate HPOV Major alarms and up events to > > > generate Normal alarms. > > > > > > HPOV is using event identifier .1.3.6.1.4.1.10984.0.1 for down events > and > > > 1.3.6.1.4.1.10984.0.2 for up/normal events. > > > > > > How do I need to setup SA/HPOV for this to work as required. > > > > > > > > > Regards > > > Steve Wright > > > Primus Telecomunications > > > > > > --- > > > > > > [This E-mail scanned for viruses by Declude Virus] > > > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > > With the following in the body of the message: > > > unsubscribe SAlive > > > > > > > > > > > > --- > > > > > > [This E-mail scanned for viruses by Declude Virus] > > > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > > With the following in the body of the message: > > > unsubscribe SAlive > > > > > > > > > -------------- > > > > [This E-mail scanned for viruses by Declude Virus] > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > With the following in the body of the message: > > unsubscribe SAlive > > > > > > > > > > -------------- > > > > [This E-mail scanned for viruses by Declude Virus] > > > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > > With the following in the body of the message: > > unsubscribe SAlive > > > > > -------------- > > [This E-mail scanned for viruses by Declude Virus] > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > With the following in the body of the message: > unsubscribe SAlive > > > > > -------------- > > [This E-mail scanned for viruses by Declude Virus] > > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] > With the following in the body of the message: > unsubscribe SAlive > -------------- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive -------------- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
