Yes, same here.

Dave, my original email was sent to the Servers Alive discussion Mailing list.
Did you perhaps confuse it with a Woodstone support email response?

Trevor


Dirk Bulinckx wrote:
> Somehow I have the feeling that you're both talking about totally different
> things...
> 
> Dirk Bulinckx. 
> 
> -----Original Message-----
> From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of
> David Carter
> Sent: Tuesday, February 05, 2008 8:50 PM
> To: Servers Alive Discussion List
> Subject: RE: [SA-list] Salive 6.1.2199 service depends on Telephony
> 
> Hi Trevor,
> 
> Thanks for the response.  The telephony service is running, and even
> stopping the ServersAlive service and restarting it makes no difference.
> The service starts fine, but I only get the one alert when a problem
> arises with the service running.  In application mode, with the service
> stopped, I get continual alerts and an update when the alert condition
> goes away.  It works in either mode, just not quite the same way.
> 
> Dave
> 
> -----Original Message-----
> From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On
> Behalf Of Trevor MacDougall
> Sent: Tuesday, February 05, 2008 2:36 PM
> To: Servers Alive Discussion List
> Subject: [SA-list] Salive 6.1.2199 service depends on Telephony
> 
> Hello again,
> 
> There was a recent change to the beta that requires the Telephony
> (TapiSrv) be running 
> before Salive will start.   If you startup Salive manually this is
> usually not an issue 
> because Telephony will be running by the time you login.
> 
> On bootup with Salive setup as an autostart service, Salive wants to run
> before the 
> Telephony service has started.  This causes Salive to fail to start.
> I've gotten around 
> this by manually editing the registry and adding the Telephony (TapiSrv)
> service as a 
> dependency to the Salive service. (details here:
> http://support.microsoft.com/kb/193888 )
> 
> Perhaps this should be added the Salive install?
> 
> Trevor MacDougall
> 
> To unsubscribe send a message with UNSUBSCRIBE as subject to
> salive@woodstone.nu
> If you use auto-responders (like out-of-the-office messages), then make
> sure that they are not send to the list nor to the individual members of
> the list that send a message.  Doing this will get you removed from the
> list.
> 
> To unsubscribe send a message with UNSUBSCRIBE as subject to 
> salive@woodstone.nu
> If you use auto-responders (like out-of-the-office messages), then make sure
> that they are not send to the list nor to the individual members of the list
> that send a message.  Doing this will get you removed from the list.
> 
> To unsubscribe send a message with UNSUBSCRIBE as subject to 
> salive@woodstone.nu
> If you use auto-responders (like out-of-the-office messages), then make sure 
> that they are not send to the list nor to the individual members of the list 
> that send a message.  Doing this will get you removed from the list.

To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu
If you use auto-responders (like out-of-the-office messages), then make sure 
that they are not send to the list nor to the individual members of the list 
that send a message.  Doing this will get you removed from the list.

Reply via email to