I don't know if the OS has an optino to delay the starting of apps that are in the startup-folder.
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of per ohlsson Sent: Friday, February 15, 2008 12:35 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Salive 6.1.2199 service depends on Telephony Running as a application and started from Startup folder. /Per >>> "Dirk Bulinckx" <[EMAIL PROTECTED]> 02/14/08 5:40 PM >>> and the problem you're having is with the service or with the app? Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of per ohlsson Sent: Thursday, February 14, 2008 5:05 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Salive 6.1.2199 service depends on Telephony If I look at Telephony, it shows that Servers Alive is depending on the service. /Per >>> From: "Dirk Bulinckx" <[EMAIL PROTECTED]> To:Servers Alive Discussion List <salive@woodstone.nu> Date: 2008-02-14 16:37 Subject: RE: [SA-list] Salive 6.1.2199 service depends on Telephony if you look in the services applet, does it show the TELEPHONY service as being depending on it? Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of per ohlsson Sent: Thursday, February 14, 2008 4:00 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Salive 6.1.2199 service depends on Telephony UPdated to offical 6.1 today and after reboot I got the same problem. Salive didn't start complaining about missing telphony services. Waited 30 sec. and tried to start Salive. Now it was started without any complains. Running as a application and started from Startup folder. Are there any way to do a delay on the startup? Best regards Per Ohlsson >>> From: "Dirk Bulinckx" <[EMAIL PROTECTED]> To:Servers Alive Discussion List <salive@woodstone.nu> Date: 2008-02-05 22:17 Subject: RE: [SA-list] Salive 6.1.2199 service depends on Telephony A lot has changed :-) but not in a way that it would need extra startup "things". Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Trevor MacDougall Sent: Tuesday, February 05, 2008 10:10 PM To: Servers Alive Discussion List Subject: Re: [SA-list] Salive 6.1.2199 service depends on Telephony Ah ok, so the Telephony has been a requirement for while then. Perhaps something else changed recently? With 6.1.2199 and Telephony set to autostart, Salive fails to start on bootup unless the dependency for Telephony is added. My guess is that Salive is attempting to start before Telephony has finished. Dirk Bulinckx wrote: > The telephony service was required since v3 (or maybe even before that), the > recent change is that IF the telephony service is not running that SA will tell > you about it and not start. In the past it looked like it was started but just > kept on using more and more RAM and CPU, and never showed the interface. > > Dirk Bulinckx. > > -----Original Message----- > From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of > Trevor MacDougall > Sent: Tuesday, February 05, 2008 8:35 PM > To: Servers Alive Discussion List > Subject: [SA-list] Salive 6.1.2199 service depends on Telephony > > Hello again, > > There was a recent change to the beta that requires the Telephony (TapiSrv) be > running > before Salive will start. If you startup Salive manually this is usually not > an issue > because Telephony will be running by the time you login. > > On bootup with Salive setup as an autostart service, Salive wants to run before > the > Telephony service has started. This causes Salive to fail to start. I've > gotten around > this by manually editing the registry and adding the Telephony (TapiSrv) service > as a > dependency to the Salive service. (details here: > http://support.microsoft.com/kb/193888 ) > > Perhaps this should be added the Salive install? > > Trevor MacDougall > > To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu > If you use auto-responders (like out-of-the-office messages), then make sure > that they are not send to the list nor to the individual members of the list > that send a message. Doing this will get you removed from the list. > > To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu > If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
