Why not rdp?
Just connect to the console session and your good to go. From: Servers Alive Discussion List [mailto:sal...@woodstone.nu] On Behalf Of Paul A Mountcastle Jr. Sent: Tuesday, March 03, 2009 1:42 PM To: Servers Alive Discussion List Subject: RE: [SA-list] website updates Hi Ian, Again, apologies for the late response to this thread. If you suggest NOT running VNC on the servers hosting SA, what do you suggest using as a remote access client? For example, I am in Arizona and my SA server (standard version 6.2.2279 running on Win2k3SP2) is located in New York. Many thanks, Paul- Paul A. Mountcastle Jr., MCP 3542121 CGAtlantic, Inc. 90 2nd Street Mineola, NY 11501 Phone: 516-625-5100 x130 Direct Dial: 928-277-1395 Cell: 928-277-3000 Email: pmountcas...@cgatlantic.com (mailto:pmountcas...@cgatlantic.com) http://www.cgatlantic.com (http://www.cgatlantic.com/) -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:sal...@woodstone.nu] On Behalf Of ian.g...@okieurope.com Sent: Wednesday, January 21, 2009 2:11 AM To: Servers Alive Discussion List Subject: Re: [SA-list] website updates Tim, 10 mins sounds like a very long time for a check cycle. Are you running VNC on the SA server? (Suggest you don't as it has a dramatic effect on performance.) Is your SA GUI set to update the interface during the check cycle in Setup - General - Interface Settings? (Again, strongly suggest you don't as this will *hugely* impact speed - turning this off took our check cycle down from about 8 mins to about 1.) Cheers, Ian _________________________________ Ian K Gray OEL IS - European Infrastructure Support Tel: +44 1236 502661 Mob: +44 7881 518854 Ad eundum quo nemo ante iit <tim.ungl...@echarris.com> Sent by: Servers Alive Discussion List <salive@woodstone.nu> 20/01/2009 10:05 Please respond to Servers Alive Discussion List <salive@woodstone.nu> To Servers Alive Discussion List <salive@woodstone.nu> cc Subject [SA-list] website updates At the moment, webpages are created right at the end of the check cycle. Could an option be added to recreate the page if a check on it changes? Our check cycle takes 10 mins or so and we have a custom web page showing what it up and down. That page can therefore be 10 mins out of date. We get the emails of course, but management like to look at the web page J tim This email and any file transmitted with it is confidential and may also be legally privileged. It is intended solely for the use of the entity or the individual to whom it is addressed. If you are not the intended recipient, please advise the sender immediately and delete the message without copying, distributing or disclosing its contents to any other person. Whilst this message has been checked for all known viruses by EC Harris, we cannot accept liability for any damage sustained as a result of software viruses and advise that you carry out your own virus checks before opening any attachment. Please consider the environment before printing this e-mail. Please view our website at http://www.echarris.com To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. ______________________________________________________________________________ Any opinions expressed in this email are those of the individual and not necessarily of the Company. This email and any files transmitted with it, including replies and forwarded copies (which may contain alterations) subsequently transmitted from the Company are confidential and solely for the use of the intended recipient. It may contain material protected by legal privilege. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. Please notify the sender immediately of the error and delete any copies of this message Warning: Although the Company has taken reasonable precautions to ensure that no viruses are present in this e-mail, the Company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. This message and any attachments are solely for the intended recipient and may contain confidential or privileged information. If you are not the intended recipient, any disclosure, copying, use, or distribution of the information included in this message and any attachments is prohibited. If you have received this communication in error, please notify us by reply e-mail and immediately and permanently delete this message and any attachments. This Message Has Been Processed By IronPort Systems, a CGAtlantic Partner. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. ------------------------------------------------------------------------------------------- The contents of this message, together with any attachments, are intended only for the use of the individual or entity to which they are addressed and may contain information that is confidential and exempt from disclosure. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately by telephone or by return E-mail and delete this message, along with any attachments, from your computer. Thank you. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
