That's true, but many years ago, I remember I bodged a small program together, which took a text file and wrote it in to SAM line by line using a MasterBasic command.
Can't remember the command off the top of my head (been a long time), but as long as the syntax was correct, it would enter it as if you were writing the line. It was useful before the emulators as you could write a bunch of lines elsewhere, (on a PC at work for example!),and bulk enter them in to a real SAM later on. It was not ideal, but saved some time re-entering lines again. Andy Saturday, February 5, 2005, 12:47:08 PM, you wrote: Aley> Paolo, Aley> as I wrote, STI converts text files from Sam to PC. Not vice versa. Aley> In simple words: Only Sam ---> PC. Aley> Bytes 10 and 13 are not present in Tasword, what is the default input Aley> encoding. So that's why STI writes those error messages. Aley> Also, I have to add one IMPORTANT note: Aley> SAM BASIC USES SPECIAL FILE FORMAT, NOT JUST TEXT FILES!!! Aley> If you want to write Basic program, use the Sam Basic. You can't write it in Aley> a text file!!! That will never work without a special Basic Aley> simulator/converter. Original Sam Basic uses format similar to ZX Spectrum Aley> basic, including all numbers in binary format, line numbers in binary Aley> format, tokenized commands/keywords (i.e. single byte per keyword), and Aley> variables stored in binary form with the Basic program in a single file. Aley> ---------------------------------------------------------- Aley> Mgr.(MSc.) Ales Keprt (also known as Aley) Aley> [EMAIL PROTECTED] *** www.keprt.cz *** ICQ: 82357182 Aley> Dept. of Computer Science, VSB Technical University Aley> Ostrava, CZ - [EMAIL PROTECTED] - www.cs.vsb.cz Aley> ---------------------------------------------------------- Aley> ----- Original Message ----- Aley> From: "Paolo Borzini" <[EMAIL PROTECTED]> Aley> To: <sam-users@nvg.ntnu.no> Aley> Sent: Friday, February 04, 2005 10:01 AM Aley> Subject: Re: Text conversion >> Hi Aley, >> >> Aley Keprt wrote: >>> you can import texts from Sam to PC also with STI. It's a part of "Aley's >>> Sam Utils", see www.keprt.cz/progs/ >> >> I've downloaded the file "Aley's Sam Utils" and also >> Net Framework 23Mb file ;-( >> I've wrote a simple basic program with MS-Dos Edit. >> But in converion step with STI, the program tell me a few error: >> Unknown code 13 and code 10 at various position. >> Probably not recognize the CR and LF . >> >> Perhaps, I've used the wrong options with STI converter ;-( >> >> Many thanks. >> >> Ciao, >> >> Paolo Borzini >> >> >> >> >>
