----- Original Message -----
From: "Ian Spencer" <[EMAIL PROTECTED]>
To: <sam-users@nvg.ntnu.no>
Sent: Saturday, February 05, 2005 5:28 PM
Subject: Re: Re[2]: Text conversion
----- Original Message -----
From: "Andy Chandler" <[EMAIL PROTECTED]>
To: "Aley Keprt" <sam-users@nvg.ntnu.no>
Sent: Saturday, February 05, 2005 2:22 PM
Subject: Re[2]: Text conversion
That's true, but many years ago, I remember I bodged a small program
together, which took a text file and wrote it in to SAM line by line
using a MasterBasic command.
That's also the way PCSUITE does it.
Ian
Can't remember the command off the top of my head (been a long time),
but as long as the syntax was correct, it would enter it as if you
were writing the line.
<Snip>
Almost forgot but working in the other direction, if your working on a PC
with SIMCOUPE then my PCPRINT program can read a basic file from a .dsk
image and convert it to a text file in typical PC format.
Ian
It's sad but these days I can't even remember what I called my programs, it
was of course SCPRINT.
Ian
