> does anybody know usage of parameter "time server = yes" ? > Exactly, how can I utilize this function on my Windows clients ?
In my experience this parameter doesn't do anything. The "net time" command in a login script works whether this is set or not. And furthermore, win2k clients can't set their clocks using the w32time service whether this is set or not. However, it is possible to set all of your clocks using w32time if you have an ntp server running on your network. Here are some notes I wrote about this for our system admins: Windows 2000 computers can run the Windows Time Service to synchronize clocks with an ntp server on the network. This is better than the method of setting the clock with a "net time" command in the logon script because it keeps the clock in sync between logins. To make it work follow these steps: 1. If it is already running, stop the Windows Time Service on the workstation. 2. On the workstation, double click the file timeset.reg to update the registry settings. See below for what these are. 3. Set the "Startup Type" of the Windows Time Service to "Automatic" and Start it. Although the literature suggests that the workstations should be able to find the time server automatically if it is running on the domain controller, that does not appear to be true. The error message received is "Member of an NT4 domain. Cannot synchronize." So maybe it only works in AD style domains, not NT4 style domains, like samba. The registry changes specifically tell the workstation where to look for the ntp server. The contents of the timeset.reg file are as follows: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters] "Period"="SpecialSkew" "NtpServer"="gecko" <--- your server here "Type"="NTP" Note that the "special skew" means that the checks will be performed every 45 minutes until 3 successful checks have been made, then once every 8 hours after that. The Time Service doesn't do any logging, but you can test to see if the sync works with the command: w32tm -once -test -v and you can see what the NtpServer is currently set to with: net time /querysntp Mark Nienberg -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba