In /etc/sane.d/.dll.conf "canon_dr" is listed, The result of command SANE_DEBUG_DLL=255 scanimage -L 2>9050.log on terminal is
sudo SANE_DEBUG_DLL=255 scanimage -L 2 > 9050.log [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.21 [dll] sane_init/read_dlld: processing /usr/local/etc/sane.d/dll.d ... [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: Couldn't open config file (dll.conf): No such file or directory [dll] sane_get_devices [dll] sane_get_devices: found 0 devices [dll] sane_exit: exiting [dll] sane_exit: finished but the 9050.log is attach. TKS Il 19/11/2010 14:26, m. allan noah ha scritto: > The canon_dr backend is not enabled. check /etc/sane.d/dll.conf, and > make sure 'canon_dr' is listed there. > > If it is listed, then try this: > > SANE_DEBUG_DLL=255 scanimage -L 2>9050.log > > and send that log. > > allan > > On Fri, Nov 19, 2010 at 7:56 AM, Luigi Carbone<lg.carbone at gmail.com> > wrote: >> Mmh, it's same. >> >> The log file is attach. >> >> Luigi >> >> Il 19/11/2010 13:33, m. allan noah ha scritto: >>> >>> Ok- as root, run this: >>> >>> SANE_DEBUG_CANON_DR=30 scanimage -L 2>9050.log >>> >>> then send 9050.log to the list. >>> >>> allan >>> >>> On Fri, Nov 19, 2010 at 2:03 AM, Luigi Carbone<lg.carbone at gmail.com> >>> wrote: >>>> >>>> With a privileges root, this is the result >>>> >>>> No scanners were identified. If you were expecting something different, >>>> check that the scanner is plugged in, turned on and detected by the >>>> sane-find-scanner tool (if appropriate). Please read the documentation >>>> which came with this software (README, FAQ, manpages). >>>> >>>> :( >>>> >>>> Il 18/11/2010 14:20, m. allan noah ha scritto: >>>>> >>>>> as root, run the following command, and send output to us: >>>>> >>>>> scanimage -L >>>>> >>>>> allan >>>>> >>>>> On Thu, Nov 18, 2010 at 7:57 AM, Luigi Carbone<lg.carbone at gmail.com> >>>>> wrote: >>>>>> >>>>>> Hi all, >>>>>> I have problem with scanner canon dr-9050C, i have ubuntu 10.04 and >>>>>> installated driver san version 1.0.21. >>>>>> >>>>>> I have configured file canon_dr.conf so >>>>>> # DR-9050C >>>>>> usb 0x1083 0x1622 >>>>>> >>>>>> the command lsusb returns >>>>>> >>>>>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>> Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard >>>>>> Receiver >>>>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>> Bus 001 Device 004: ID 152e:2507 LG (HLDS) >>>>>> Bus 001 Device 003: ID 1083:1622 Canon Electronics, Inc. >>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>> >>>>>> the scanner is visible to the system... >>>>>> >>>>>> Help me. >>>>>> -- >>>> >> >> > > > -- Luigi Carbone ---------------------- Owner @ http://www.ingenioweb.it Web Designer @ www.consulenti-ict.it CV: http://www.linkedin.com/in/carboneluigi Skype: corsaro832 Cell: 340 32 15 783 -------------- next part -------------- A non-text attachment was scrubbed... Name: 9050.log Type: text/x-log Size: 267 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20101122/dc43410c/attachment.bin>