Ok I solved the problem of the installation, now the scanner works with the following commands, but only if I start xsane as root. Omitting this, returns this error when I start xsane from a terminal
(xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (xsane:9913): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated tks for help Il 22/11/2010 12:33, m. allan noah ha scritto: > "/usr/local/etc/sane.d/dll.d" > > you have two copies of sane installed, and the one in /usr/local is > being used, but it has no config files. I would remove that copy, and > re-configure with the proper arguments to overwrite your existing > copy. Something like: > > ./configure --prefix=/usr --sysconfdir=/etc > make > make install > > allan > > On Mon, Nov 22, 2010 at 2:30 AM, Luigi Carbone<lg.carbone at gmail.com> > wrote: >> In /etc/sane.d/.dll.conf "canon_dr" is listed, >> >> The result of command SANE_DEBUG_DLL=255 scanimage -L 2>9050.log on terminal >> is >> >> sudo SANE_DEBUG_DLL=255 scanimage -L 2> 9050.log >> [sanei_debug] Setting debug level of dll to 255. >> [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.21 >> [dll] sane_init/read_dlld: processing /usr/local/etc/sane.d/dll.d ... >> [dll] sane_init/read_dlld: done. >> [dll] sane_init/read_config: Couldn't open config file (dll.conf): No such >> file or directory >> [dll] sane_get_devices >> [dll] sane_get_devices: found 0 devices >> [dll] sane_exit: exiting >> [dll] sane_exit: finished >> >> but the 9050.log is attach. >> >> TKS >> >> Il 19/11/2010 14:26, m. allan noah ha scritto: >>> >>> The canon_dr backend is not enabled. check /etc/sane.d/dll.conf, and >>> make sure 'canon_dr' is listed there. >>> >>> If it is listed, then try this: >>> >>> SANE_DEBUG_DLL=255 scanimage -L 2>9050.log >>> >>> and send that log. >>> >>> allan >>> >>> On Fri, Nov 19, 2010 at 7:56 AM, Luigi Carbone<lg.carbone at gmail.com> >>> wrote: >>>> >>>> Mmh, it's same. >>>> >>>> The log file is attach. >>>> >>>> Luigi >>>> >>>> Il 19/11/2010 13:33, m. allan noah ha scritto: >>>>> >>>>> Ok- as root, run this: >>>>> >>>>> SANE_DEBUG_CANON_DR=30 scanimage -L 2>9050.log >>>>> >>>>> then send 9050.log to the list. >>>>> >>>>> allan >>>>> >>>>> On Fri, Nov 19, 2010 at 2:03 AM, Luigi Carbone<lg.carbone at gmail.com> >>>>> wrote: >>>>>> >>>>>> With a privileges root, this is the result >>>>>> >>>>>> No scanners were identified. If you were expecting something different, >>>>>> check that the scanner is plugged in, turned on and detected by the >>>>>> sane-find-scanner tool (if appropriate). Please read the documentation >>>>>> which came with this software (README, FAQ, manpages). >>>>>> >>>>>> :( >>>>>> >>>>>> Il 18/11/2010 14:20, m. allan noah ha scritto: >>>>>>> >>>>>>> as root, run the following command, and send output to us: >>>>>>> >>>>>>> scanimage -L >>>>>>> >>>>>>> allan >>>>>>> >>>>>>> On Thu, Nov 18, 2010 at 7:57 AM, Luigi Carbone<lg.carbone at gmail.com> >>>>>>> wrote: >>>>>>>> >>>>>>>> Hi all, >>>>>>>> I have problem with scanner canon dr-9050C, i have ubuntu 10.04 and >>>>>>>> installated driver san version 1.0.21. >>>>>>>> >>>>>>>> I have configured file canon_dr.conf so >>>>>>>> # DR-9050C >>>>>>>> usb 0x1083 0x1622 >>>>>>>> >>>>>>>> the command lsusb returns >>>>>>>> >>>>>>>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>>> Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless >>>>>>>> Mouse+Keyboard >>>>>>>> Receiver >>>>>>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>>>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>>>> Bus 001 Device 004: ID 152e:2507 LG (HLDS) >>>>>>>> Bus 001 Device 003: ID 1083:1622 Canon Electronics, Inc. >>>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>>>>>> >>>>>>>> the scanner is visible to the system... >>>>>>>> >>>>>>>> Help me. >>>>>>>> -- >>>>>> >>>> -- Luigi Carbone ---------------------- Owner @ http://www.ingenioweb.it Web Designer @ www.consulenti-ict.it CV: http://www.linkedin.com/in/carboneluigi Skype: corsaro832 Cell: 340 32 15 783