Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Robert Nelson robertcnel...@gmail.com [14-12-01 16:56]: Hi Robert, thank you for your posting! :) THATS really good news: Independance from any specialized patches! :) Only to ensure, that I am not confusing things again: I interpret Mainline as: Take a kernel from ftp.kernel.org Or does the free-electrons guys took over mach-at91 mean, that I should search their site for their kernel sources? The free-electron guys only work on mainline, so all their patches are heading to mainline. (kernel.org) For the last 2 kernel releases's they've cleaning up everything in mach-at91 and pushing everything to device tree's. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. Hi Robert, THANK YOU SO MUCH FOR THAT HINT! :) The new kernel version and the hint from Acmesystems mailing list to explicitely set the XTALs clock frequencies in the dts file are the solutions for both problems -- the running clock and not being able to poweroff the board! Now the clock is just *in* time and poweroff powers off the board. GREAT! I am happy! Thank you VERY much! Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Robert Nelson robertcnel...@gmail.com [14-12-01 16:56]: Hi Robert, thank you for your posting! :) THATS really good news: Independance from any specialized patches! :) Only to ensure, that I am not confusing things again: I interpret Mainline as: Take a kernel from ftp.kernel.org Or does the free-electrons guys took over mach-at91 mean, that I should search their site for their kernel sources? The free-electron guys only work on mainline, so all their patches are heading to mainline. (kernel.org) For the last 2 kernel releases's they've cleaning up everything in mach-at91 and pushing everything to device tree's. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. Hi Robert, THANK YOU ! :)) Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Hi, I am using a Arietta G25 (http://www.acmesystems.it/arietta) with Robert Nelsons Kernel 3.17.3 and the kernel configuration provided by Acmesystems for their Debian Linux for the Arietta G25 based on Linux kernel 3.16.1. As far as I know the only patches they used are agains dts/dtb files (I use the same ones) and to configure the kernel without the need of using makeconfig. So far so nice...the system boots with a Gentoo stage3 rootfs. There only two things left: 1.) shuthdown -h -H now (as said to be used by Acmesystems) reboots the system instead of powering it off (which works with their image). 2.) The at91 RTC is missing the Real...the difference are several minutes per hour. I compared the dmesg output of the Arietta G25 booted with one and the other system. With the Gentoo system there is one line which irritates me and may indicate a way to a solution for the RTC problem: [0.00] Main crystal frequency not set, using approximate value [0.00] master clk is overclocked [0.00] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 167772160ns [0.00] Console: colour dummy device 80x30 [0.054687] Calibrating delay loop... 220.07 BogoMIPS (lpj=862208) The clock frequency of the CPU is unknown??? The Debian system does not have that problem... Any suggestion how to fix one or (better! :) both problem is VERY 8) appreciated! Thank you very much in advance for any help! Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
About the time clock , as I know , its about the crystal , called jitter ? You can correct it with NTP client or GPS , ( if you have gps ) 2014-11-30 23:55 GMT+08:00 meino.cra...@gmx.de: Hi, I am using a Arietta G25 (http://www.acmesystems.it/arietta) with Robert Nelsons Kernel 3.17.3 and the kernel configuration provided by Acmesystems for their Debian Linux for the Arietta G25 based on Linux kernel 3.16.1. As far as I know the only patches they used are agains dts/dtb files (I use the same ones) and to configure the kernel without the need of using makeconfig. So far so nice...the system boots with a Gentoo stage3 rootfs. There only two things left: 1.) shuthdown -h -H now (as said to be used by Acmesystems) reboots the system instead of powering it off (which works with their image). 2.) The at91 RTC is missing the Real...the difference are several minutes per hour. I compared the dmesg output of the Arietta G25 booted with one and the other system. With the Gentoo system there is one line which irritates me and may indicate a way to a solution for the RTC problem: [0.00] Main crystal frequency not set, using approximate value [0.00] master clk is overclocked [0.00] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 167772160ns [0.00] Console: colour dummy device 80x30 [0.054687] Calibrating delay loop... 220.07 BogoMIPS (lpj=862208) The clock frequency of the CPU is unknown??? The Debian system does not have that problem... Any suggestion how to fix one or (better! :) both problem is VERY 8) appreciated! Thank you very much in advance for any help! Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Hi liyaoshi, thanks for your posting! I am not searching for workaround -- the small Arietta will become a mobile device which has no connection to the internet. I am searching for the reasons of the two problems and want to fix the (currently unknown) bugs behind that. Even without sync an RTC should not become THAT wrong as the RTC of the Arietta currently. What does this dump from dmesg mean? Best regards, Meino liyaoshi liyao...@gmail.com [14-12-01 02:57]: About the time clock , as I know , its about the crystal , called jitter ? You can correct it with NTP client or GPS , ( if you have gps ) 2014-11-30 23:55 GMT+08:00 meino.cra...@gmx.de: Hi, I am using a Arietta G25 (http://www.acmesystems.it/arietta) with Robert Nelsons Kernel 3.17.3 and the kernel configuration provided by Acmesystems for their Debian Linux for the Arietta G25 based on Linux kernel 3.16.1. As far as I know the only patches they used are agains dts/dtb files (I use the same ones) and to configure the kernel without the need of using makeconfig. So far so nice...the system boots with a Gentoo stage3 rootfs. There only two things left: 1.) shuthdown -h -H now (as said to be used by Acmesystems) reboots the system instead of powering it off (which works with their image). 2.) The at91 RTC is missing the Real...the difference are several minutes per hour. I compared the dmesg output of the Arietta G25 booted with one and the other system. With the Gentoo system there is one line which irritates me and may indicate a way to a solution for the RTC problem: [0.00] Main crystal frequency not set, using approximate value [0.00] master clk is overclocked [0.00] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 167772160ns [0.00] Console: colour dummy device 80x30 [0.054687] Calibrating delay loop... 220.07 BogoMIPS (lpj=862208) The clock frequency of the CPU is unknown??? The Debian system does not have that problem... Any suggestion how to fix one or (better! :) both problem is VERY 8) appreciated! Thank you very much in advance for any help! Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
seems dts config file error , but from http://www.acmesystems.it/compile_linux_3_16 maybe you should try this patch http://www.acmesystems.it/www/compile_linux_3_16/acme.patch or can you show up your patch ? 2014-12-01 10:38 GMT+08:00 meino.cra...@gmx.de: Hi liyaoshi, thanks for your posting! I am not searching for workaround -- the small Arietta will become a mobile device which has no connection to the internet. I am searching for the reasons of the two problems and want to fix the (currently unknown) bugs behind that. Even without sync an RTC should not become THAT wrong as the RTC of the Arietta currently. What does this dump from dmesg mean? Best regards, Meino liyaoshi liyao...@gmail.com [14-12-01 02:57]: About the time clock , as I know , its about the crystal , called jitter ? You can correct it with NTP client or GPS , ( if you have gps ) 2014-11-30 23:55 GMT+08:00 meino.cra...@gmx.de: Hi, I am using a Arietta G25 (http://www.acmesystems.it/arietta) with Robert Nelsons Kernel 3.17.3 and the kernel configuration provided by Acmesystems for their Debian Linux for the Arietta G25 based on Linux kernel 3.16.1. As far as I know the only patches they used are agains dts/dtb files (I use the same ones) and to configure the kernel without the need of using makeconfig. So far so nice...the system boots with a Gentoo stage3 rootfs. There only two things left: 1.) shuthdown -h -H now (as said to be used by Acmesystems) reboots the system instead of powering it off (which works with their image). 2.) The at91 RTC is missing the Real...the difference are several minutes per hour. I compared the dmesg output of the Arietta G25 booted with one and the other system. With the Gentoo system there is one line which irritates me and may indicate a way to a solution for the RTC problem: [0.00] Main crystal frequency not set, using approximate value [0.00] master clk is overclocked [0.00] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 167772160ns [0.00] Console: colour dummy device 80x30 [0.054687] Calibrating delay loop... 220.07 BogoMIPS (lpj=862208) The clock frequency of the CPU is unknown??? The Debian system does not have that problem... Any suggestion how to fix one or (better! :) both problem is VERY 8) appreciated! Thank you very much in advance for any help! Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
On Sun, Nov 30, 2014 at 8:59 PM, liyaoshi liyao...@gmail.com wrote: seems dts config file error , but from http://www.acmesystems.it/compile_linux_3_16 maybe you should try this patch http://www.acmesystems.it/www/compile_linux_3_16/acme.patch That's for the Cortex-A5 from Atmel, the Arietta G25 should be fully supported on mainline. There's been lots of rtc changes, you should retry with 3.18-rc7, as the free-electrons guys took over mach-at91.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Hi liyaoshi, in the meanwhile I digged deeper into the kernel and found, that in Linux 3.17.3 there is a new configuration item AT91_USE_OLD_CLK which is set to n which in turn set USE_OLD_CLK to n. But last get set when using Linux 3.16.1. I compiled Linux 3.16.1 with the instructions of Acmesystems (including the patch, which inserts some dts files and the kernel configuration itsself) and it seems (no long period done though) that the RTC problem is gone. As Robert mentioned in his mail to this thread, there were a lot of RTC changes AND (TADA!) the Arietta should be supported by the mainline kernel, which in turn makes me completly independant from any patches by acmesystems (*NO* inplicite or explicite cirtism intended here!!!), which are GOOD news. Gentlemen...start your compilers! Best regards, Meino liyaoshi liyao...@gmail.com [14-12-01 04:04]: seems dts config file error , but from http://www.acmesystems.it/compile_linux_3_16 maybe you should try this patch http://www.acmesystems.it/www/compile_linux_3_16/acme.patch or can you show up your patch ? 2014-12-01 10:38 GMT+08:00 meino.cra...@gmx.de: Hi liyaoshi, thanks for your posting! I am not searching for workaround -- the small Arietta will become a mobile device which has no connection to the internet. I am searching for the reasons of the two problems and want to fix the (currently unknown) bugs behind that. Even without sync an RTC should not become THAT wrong as the RTC of the Arietta currently. What does this dump from dmesg mean? Best regards, Meino liyaoshi liyao...@gmail.com [14-12-01 02:57]: About the time clock , as I know , its about the crystal , called jitter ? You can correct it with NTP client or GPS , ( if you have gps ) 2014-11-30 23:55 GMT+08:00 meino.cra...@gmx.de: Hi, I am using a Arietta G25 (http://www.acmesystems.it/arietta) with Robert Nelsons Kernel 3.17.3 and the kernel configuration provided by Acmesystems for their Debian Linux for the Arietta G25 based on Linux kernel 3.16.1. As far as I know the only patches they used are agains dts/dtb files (I use the same ones) and to configure the kernel without the need of using makeconfig. So far so nice...the system boots with a Gentoo stage3 rootfs. There only two things left: 1.) shuthdown -h -H now (as said to be used by Acmesystems) reboots the system instead of powering it off (which works with their image). 2.) The at91 RTC is missing the Real...the difference are several minutes per hour. I compared the dmesg output of the Arietta G25 booted with one and the other system. With the Gentoo system there is one line which irritates me and may indicate a way to a solution for the RTC problem: [0.00] Main crystal frequency not set, using approximate value [0.00] master clk is overclocked [0.00] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 167772160ns [0.00] Console: colour dummy device 80x30 [0.054687] Calibrating delay loop... 220.07 BogoMIPS (lpj=862208) The clock frequency of the CPU is unknown??? The Debian system does not have that problem... Any suggestion how to fix one or (better! :) both problem is VERY 8) appreciated! Thank you very much in advance for any help! Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- For more options, visit
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Robert Nelson robertcnel...@gmail.com [14-12-01 04:04]: On Sun, Nov 30, 2014 at 8:59 PM, liyaoshi liyao...@gmail.com wrote: seems dts config file error , but from http://www.acmesystems.it/compile_linux_3_16 maybe you should try this patch http://www.acmesystems.it/www/compile_linux_3_16/acme.patch That's for the Cortex-A5 from Atmel, the Arietta G25 should be fully supported on mainline. There's been lots of rtc changes, you should retry with 3.18-rc7, as the free-electrons guys took over mach-at91.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. Hi Robert, thank you for your posting! :) THATS really good news: Independance from any specialized patches! :) Only to ensure, that I am not confusing things again: I interpret Mainline as: Take a kernel from ftp.kernel.org Or does the free-electrons guys took over mach-at91 mean, that I should search their site for their kernel sources? Best regards, Meino -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] [OT]: ATMEL AT91SAM9G25/ARM926EJ-S Helpneededforinterpretationofadmesgmessage
Hi Robert, thank you for your posting! :) THATS really good news: Independance from any specialized patches! :) Only to ensure, that I am not confusing things again: I interpret Mainline as: Take a kernel from ftp.kernel.org Or does the free-electrons guys took over mach-at91 mean, that I should search their site for their kernel sources? The free-electron guys only work on mainline, so all their patches are heading to mainline. (kernel.org) For the last 2 kernel releases's they've cleaning up everything in mach-at91 and pushing everything to device tree's. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.