[beagleboard] Dell U2410 hdmi woes (wheezy)
I have a strange one. I am using a Dell U2410 monitor. It just so happens that I have the same monitor described at http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI I loaded the image https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-03-27-2gb.img.xz on my BBB When the HDMI output of the BBB is connected to the HDMI input on the monitor all goes well until the X desktop is started. As soon as X is started the monitor goes into power-save mode. Press cntl-alt F1 to get to a non-gui login and the display turns on. Switch back to F7 and the monitor goes into power-save. If I use a HDMI to DVI adapter and use the DVI input on the U2410, the X desktop display is OK. I can even use xrandr to change resolution to 1280x1024 (dvi input) which works fine. I have deduced that when the BBB gets the EDID info from the monitor, it changes to a mode that the Dell U2410 does not like but only with the X desktop. Anyone have any ideas? I am hesitant to blame the LXDE X server for this but anything is possible. . -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Dell U2410 hdmi woes (wheezy)
On Fri, Mar 28, 2014 at 8:32 AM, Richard-tx wrote: > I have a strange one. > > I am using a Dell U2410 monitor. It just so happens that I have the same > monitor described at http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI > > I loaded the image > https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-03-27-2gb.img.xz > on my BBB > > When the HDMI output of the BBB is connected to the HDMI input on the > monitor all goes well until the X desktop is started. As soon as X is > started the monitor goes into power-save mode. Press cntl-alt F1 to get to > a non-gui login and the display turns on. Switch back to F7 and the monitor > goes into power-save. You can disable power save via: echo "#!/bin/sh" > ~/.xsessionrc echo "" >> ~/.xsessionrc echo "xset -dpms" >> ~/.xsessionrc echo "xset s off" >> ~/.xsessionrc > If I use a HDMI to DVI adapter and use the DVI input on the U2410, the X > desktop display is OK. I can even use xrandr to change resolution to > 1280x1024 (dvi input) which works fine. > > > I have deduced that when the BBB gets the EDID info from the monitor, it > changes to a mode that the Dell U2410 does not like but only with the X > desktop. > > Anyone have any ideas? I am hesitant to blame the LXDE X server for this > but anything is possible. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Dell U2410 hdmi woes (wheezy)
I had the same issue.finally this worked for me sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup sudo apt-get install xserver-xorg-video-fbdev sudo reboot search "Debian X11/LDE display problem ?" YMMV On 28 March 2014 14:42, Robert Nelson wrote: > On Fri, Mar 28, 2014 at 8:32 AM, Richard-tx > wrote: > > I have a strange one. > > > > I am using a Dell U2410 monitor. It just so happens that I have the same > > monitor described at http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI > > > > I loaded the image > > > https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-03-27-2gb.img.xz > > on my BBB > > > > When the HDMI output of the BBB is connected to the HDMI input on the > > monitor all goes well until the X desktop is started. As soon as X is > > started the monitor goes into power-save mode. Press cntl-alt F1 to get > to > > a non-gui login and the display turns on. Switch back to F7 and the > monitor > > goes into power-save. > > You can disable power save via: > > echo "#!/bin/sh" > ~/.xsessionrc > echo "" >> ~/.xsessionrc > echo "xset -dpms" >> ~/.xsessionrc > echo "xset s off" >> ~/.xsessionrc > > > > If I use a HDMI to DVI adapter and use the DVI input on the U2410, the X > > desktop display is OK. I can even use xrandr to change resolution to > > 1280x1024 (dvi input) which works fine. > > > > > > I have deduced that when the BBB gets the EDID info from the monitor, it > > changes to a mode that the Dell U2410 does not like but only with the X > > desktop. > > > > Anyone have any ideas? I am hesitant to blame the LXDE X server for this > > but anything is possible. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Dell U2410 hdmi woes (wheezy)
The odd part is that it is not going into power savenot really. The Dell monitor will go into power save mode if the video being supplied is out of range. I tried shutting off power save mode first and that did nothing. I have a .xsessionrc file and it already contains what you suggested. I tried swapping cables while it was up and running. When I did that, the monitor briefly displayed what looked like a double image (side to side) and then went into powersave mode. I was wrong about the image URL I used. Here is the URL http://debian.beagleboard.org/images/BBB-eMMC-flasher-debian-7.4-2014-03-27-2gb.img.xz So what I did was add "xhost +" to the .xsessionrc file Then I logged in and did the following: # export DISPLAY=:0 # xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 2048 x 2048 HDMI-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1080 24.0 1280x720 50.0 60.0 720x57650.0 720x48059.9 640x48059.9* In the middle of this I tried a few things and found a work around. I added xrandr --output HDMI-0 --auto to .xsessionrc Now I have a reasonable X desktop. We can mark this solved.. Richard On Friday, March 28, 2014 8:42:34 AM UTC-5, RobertCNelson wrote: > > On Fri, Mar 28, 2014 at 8:32 AM, Richard-tx > > > wrote: > > I have a strange one. > > > > I am using a Dell U2410 monitor. It just so happens that I have the > same > > monitor described at http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI > > > > I loaded the image > > > https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-03-27-2gb.img.xz > > on my BBB > > > > When the HDMI output of the BBB is connected to the HDMI input on the > > monitor all goes well until the X desktop is started. As soon as X is > > started the monitor goes into power-save mode. Press cntl-alt F1 to get > to > > a non-gui login and the display turns on. Switch back to F7 and the > monitor > > goes into power-save. > > You can disable power save via: > > echo "#!/bin/sh" > ~/.xsessionrc > echo "" >> ~/.xsessionrc > echo "xset -dpms" >> ~/.xsessionrc > echo "xset s off" >> ~/.xsessionrc > > > > If I use a HDMI to DVI adapter and use the DVI input on the U2410, the X > > desktop display is OK. I can even use xrandr to change resolution to > > 1280x1024 (dvi input) which works fine. > > > > > > I have deduced that when the BBB gets the EDID info from the monitor, it > > changes to a mode that the Dell U2410 does not like but only with the X > > desktop. > > > > Anyone have any ideas? I am hesitant to blame the LXDE X server for > this > > but anything is possible. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Dell U2410 hdmi woes (wheezy)
On Friday, March 28, 2014 1:00:23 PM UTC-5, dumb looks free wrote: > > I had the same issue.finally this worked for me > > sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup > sudo apt-get install xserver-xorg-video-fbdev > sudo reboot > > search "Debian X11/LDE display problem ?" > > > YMMV > Google got tired of me searching for "debian lde x11 display problem" I finally tried setting the video mode to auto using xrandr and that fixed it. Go figure. Richard > > > On 28 March 2014 14:42, Robert Nelson >wrote: > >> On Fri, Mar 28, 2014 at 8:32 AM, Richard-tx >> > >> wrote: >> > I have a strange one. >> > >> > I am using a Dell U2410 monitor. It just so happens that I have the >> same >> > monitor described at http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI >> > >> > I loaded the image >> > >> https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-03-27-2gb.img.xz >> > on my BBB >> > >> > When the HDMI output of the BBB is connected to the HDMI input on the >> > monitor all goes well until the X desktop is started. As soon as X is >> > started the monitor goes into power-save mode. Press cntl-alt F1 to >> get to >> > a non-gui login and the display turns on. Switch back to F7 and the >> monitor >> > goes into power-save. >> >> You can disable power save via: >> >> echo "#!/bin/sh" > ~/.xsessionrc >> echo "" >> ~/.xsessionrc >> echo "xset -dpms" >> ~/.xsessionrc >> echo "xset s off" >> ~/.xsessionrc >> >> >> > If I use a HDMI to DVI adapter and use the DVI input on the U2410, the X >> > desktop display is OK. I can even use xrandr to change resolution to >> > 1280x1024 (dvi input) which works fine. >> > >> > >> > I have deduced that when the BBB gets the EDID info from the monitor, it >> > changes to a mode that the Dell U2410 does not like but only with the X >> > desktop. >> > >> > Anyone have any ideas? I am hesitant to blame the LXDE X server for >> this >> > but anything is possible. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Dell U2410 hdmi woes (wheezy)
Yes - sorry, I had trouble to get the link also. Here it is very similar issues. https://groups.google.com/d/msg/beagleboard/PKPD345Fbgg/6RO_mKOsq0QJ BTW ... I think I recognize your handle from the RPI site !!! On Friday, 28 March 2014 19:44:00 UTC+1, Richard-tx wrote: > > > > On Friday, March 28, 2014 1:00:23 PM UTC-5, dumb looks free wrote: >> >> I had the same issue.finally this worked for me >> >> sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup >> sudo apt-get install xserver-xorg-video-fbdev >> sudo reboot >> >> search "Debian X11/LDE display problem ?" >> >> >> YMMV >> > > Google got tired of me searching for "debian lde x11 display problem" I > finally tried setting the video mode to auto using xrandr and that fixed > it. Go figure. > > Richard > >> >> >> On 28 March 2014 14:42, Robert Nelson wrote: >> >>> On Fri, Mar 28, 2014 at 8:32 AM, Richard-tx wrote: >>> > I have a strange one. >>> > >>> > I am using a Dell U2410 monitor. It just so happens that I have the >>> same >>> > monitor described at >>> http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI >>> > >>> > I loaded the image >>> > >>> https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.4-2014-03-27-2gb.img.xz >>> > on my BBB >>> > >>> > When the HDMI output of the BBB is connected to the HDMI input on the >>> > monitor all goes well until the X desktop is started. As soon as X is >>> > started the monitor goes into power-save mode. Press cntl-alt F1 to >>> get to >>> > a non-gui login and the display turns on. Switch back to F7 and the >>> monitor >>> > goes into power-save. >>> >>> You can disable power save via: >>> >>> echo "#!/bin/sh" > ~/.xsessionrc >>> echo "" >> ~/.xsessionrc >>> echo "xset -dpms" >> ~/.xsessionrc >>> echo "xset s off" >> ~/.xsessionrc >>> >>> >>> > If I use a HDMI to DVI adapter and use the DVI input on the U2410, the >>> X >>> > desktop display is OK. I can even use xrandr to change resolution to >>> > 1280x1024 (dvi input) which works fine. >>> > >>> > >>> > I have deduced that when the BBB gets the EDID info from the monitor, >>> it >>> > changes to a mode that the Dell U2410 does not like but only with the X >>> > desktop. >>> > >>> > Anyone have any ideas? I am hesitant to blame the LXDE X server for >>> this >>> > but anything is possible. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Dell U2410 hdmi woes (wheezy)
Yes, I am on the Rpi site as well. I decided to try a BBB. The BBB has certain features the RPI does not; like multiple UARTs. I have a terminal server that died on me so I am making one from a BBB. The only thing I wish is that this forum were hosted on something like phpBB3. Google groups is missing certain functions that I rely on. Richard On Friday, March 28, 2014 1:56:11 PM UTC-5, dumb looks free wrote: > > Yes - sorry, I had trouble to get the link also. Here it is very > similar issues. > > https://groups.google.com/d/msg/beagleboard/PKPD345Fbgg/6RO_mKOsq0QJ > > BTW ... I think I recognize your handle from the RPI site !!! > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
