Re: [Chevelle-list] Bellhousing question
I sent you an e-bay listing that has very good pictures for what your are looking for. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of [EMAIL PROTECTED] Sent: Thursday, May 11, 2006 1:38 AM To: Chevelle-list@chevelles.net Subject: [Chevelle-list] Bellhousing question Last night I was ready to install my BB finally into my 69 Chevelle, come to find out that the bellhousing does not fit (TOO SMALL) I had this bellhousing off my 350 which fit with the old flywheel which is about 12 inches in radius. I installed a new and correct flywheel 14 inches in radius . I was told that I need a 621 bellhousing, is this correct. If so does anyone on the list have one for sale? Thanks Joe P.
Re: [Chevelle-list] Bellhousing question
Joe, no numbers that I see unless I am not looking in the right place. I can tell you the flywheel that was on the truck was a 14". I have the complete shot clutch, pressure plate and flywheel on a shelf with the bellhousing. Hope that helps. Carl Blab-away for as little as 1¢/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice.
Re: [Chevelle-list] Bellhousing question
Carl, Any #'s stamped on the Bellhousing? Joe
Re: [Chevelle-list] Bellhousing question
Joe, I don't know the number of the bellhousing but it came off a 79 C10. Sounds good on the brackets, let me know. Carl New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
Re: [Chevelle-list] Bellhousing question
I already ordered the bellhousing today, your truck bellhousing is it a 661?? If you wait some guy next week wants my 350 engine if he doesn't take the brackets which I think he will not, then I will be glad to sell you my brackets Joe P.
Re: [Chevelle-list] Bellhousing question
Joe, I will trade you even up a truck bellhousing for the AC bracket you have that I need. Let me know. How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
Re: [Chevelle-list] Bellhousing question
Thanks guys as usual with all your help... All I have to say is that you guys are always there with help... Thanks again group. Joe P. -Original Message-From: John <[EMAIL PROTECTED]>To: The Chevelle Mailing List Sent: Thu, 11 May 2006 17:03:43 -0500Subject: Re: [Chevelle-list] Bellhousing question You can use the truck bellhousing (much cheaper) and get a spacer for the transmission bearing retainer. I got one from the following and it works great! Dennis Wayne McLeodToolcraft Co., Inc.Cell 502-558-1043Office 502-222-5764FAX 502-222-5942 I think that the total including S & H was $28.00 for the spacer ring. He really does good work and is very easy to deal with. Tell him I gave you his info if you talk to him or email him. His email is www.dennymac.com Hope this helps John - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Thursday, May 11, 2006 12:37 AM Subject: [Chevelle-list] Bellhousing question Last night I was ready to install my BB finally into my 69 Chevelle, come to find out that the bellhousing does not fit (TOO SMALL) I had this bellhousing off my 350 which fit with the old flywheel which is about 12 inches in radius. I installed a new and correct flywheel 14 inches in radius . I was told that I need a 621 bellhousing, is this correct. If so does anyone on the list have one for sale? Thanks Joe P.
Re: [Chevelle-list] Bellhousing question
You can use the truck bellhousing (much cheaper) and get a spacer for the transmission bearing retainer. I got one from the following and it works great! Dennis Wayne McLeodToolcraft Co., Inc.Cell 502-558-1043Office 502-222-5764FAX 502-222-5942 I think that the total including S & H was $28.00 for the spacer ring. He really does good work and is very easy to deal with. Tell him I gave you his info if you talk to him or email him. His email is www.dennymac.com Hope this helps John - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Thursday, May 11, 2006 12:37 AM Subject: [Chevelle-list] Bellhousing question Last night I was ready to install my BB finally into my 69 Chevelle, come to find out that the bellhousing does not fit (TOO SMALL) I had this bellhousing off my 350 which fit with the old flywheel which is about 12 inches in radius. I installed a new and correct flywheel 14 inches in radius . I was told that I need a 621 bellhousing, is this correct. If so does anyone on the list have one for sale? Thanks Joe P.
Re: [Chevelle-list] Bellhousing question
Joe, I think the after market is reproducing them. check year one, ground up etc.. I seen an O.E one at englishtown swap a couple weeks ago guy was asking $250. good luck, Jimmy C. - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Thursday, May 11, 2006 1:37 AM Subject: [Chevelle-list] Bellhousing question Last night I was ready to install my BB finally into my 69 Chevelle, come to find out that the bellhousing does not fit (TOO SMALL) I had this bellhousing off my 350 which fit with the old flywheel which is about 12 inches in radius. I installed a new and correct flywheel 14 inches in radius . I was told that I need a 621 bellhousing, is this correct. If so does anyone on the list have one for sale? Thanks Joe P.
Re: [Chevelle-list] Bellhousing question
You don't need to have a 621 bellhousing, you can use a 444 casting as well. Dig deep if you are after a 621 housing. You can use a truck bellhousing also, you just need a bushing on the bearing retainer since the hole is a bit bigger. Tom
Re: [Chevelle-List] Bellhousing question...
Thanks! ANd Thanks Steve for your info as well. Learn something new every day! Josh Gin (NoNeck) Visit my Chevelle website www.NoNecksChevelle.com - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, August 17, 2002 5:36 AM Subject: Re: [Chevelle-List] Bellhousing question... > Josh > This site has some bellhousing numbers listed. It has the 486 listed as a 12" > truck bellhousing. > http://www.tracyvette.com/bellhousings.html > > - > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
Re: [Chevelle-List] Bellhousing question...
Josh This site has some bellhousing numbers listed. It has the 486 listed as a 12" truck bellhousing. http://www.tracyvette.com/bellhousings.html - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
RE: [Chevelle-List] Bellhousing question...
Gents, I know this one. It's weird, but true..I know because I have one! In the beginning of the 80's GM started buying "New Process" trannies from Chrysler and made the 4th gear in these trannies less than a 1:1 ratio to improve gas milage and I assume to meet the new tougher federal fuel economy requirements. Just a guess on why here. So the bolt pattern fits on GM engines and supposedly this thing will swap out straight with a TH350 because they are the same exact length when all is said and done...or within a 1/4 inch or so, from what I have read. In any case, up until somewhere between the mid and late 80's these 4 speed trannys were used in the Chevy Trucks. They are obviously beefier in at least some respects than a car tranny. How much and in what ways I am not sure, not an expert on them here, but I do have some resources on the net bookmarked on them. I have that same exact bellhousing or I might be bidding on that one. I bought it for the fact that I was told it was a stronger tranny AND the fact that 4th gear is an overdrivewill make for better mileage on long trips to car shows. I don't have mine in yet, and have yet to find someone that have put one in and has used it yet. Several are in the process of doing so however. I find it interesting because the 396 engine I bought came out of a truck as well. Now all I need is a truck posi unit for the rear and I can really "HAUL" in my Chevelle :) Steve -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of NoNeck Sent: Friday, August 16, 2002 10:39 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Bellhousing question... Duh. Yeah, I did mean the 621 Kurt. The auction you sent mentions that it won't fit a M-22 and is truck only. Mine was hooked to a M-21 in my Chevelle. H. Josh Gin (NoNeck) Visit my Chevelle website www.NoNecksChevelle.com - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 16, 2002 7:03 PM Subject: Re: [Chevelle-List] Bellhousing question... > In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time, > [EMAIL PROTECTED] writes: > > > All the ones on ebay are 681's, but this is part number 460486. > > Anybody > know > > anyhting about this bell? I thought only the 681's were for the big clutch, > > but this one looks almost identical to the 681 > > Josh, > You probably mean the '621' bellhousing for the 11" > clutch. I've > got one of those bells. Anyhow here is a link to an auction on ebay for the > '486' bellhousing you mention. The seller claims it can fit up to a > 12" clutch. HTH. > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=18519238 > 45 > > - > Kurt Ehrhardt > ACES #1280 > 66 Malibu > 66 SuperSport > Enfield, CT > > - > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
Re: [Chevelle-List] Bellhousing question...
Duh. Yeah, I did mean the 621 Kurt. The auction you sent mentions that it won't fit a M-22 and is truck only. Mine was hooked to a M-21 in my Chevelle. H. Josh Gin (NoNeck) Visit my Chevelle website www.NoNecksChevelle.com - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 16, 2002 7:03 PM Subject: Re: [Chevelle-List] Bellhousing question... > In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time, > [EMAIL PROTECTED] writes: > > > All the ones on ebay are 681's, but this is part number 460486. Anybody > know > > anyhting about this bell? I thought only the 681's were for the big clutch, > > but this one looks almost identical to the 681 > > Josh, > You probably mean the '621' bellhousing for the 11" clutch. I've > got one of those bells. Anyhow here is a link to an auction on ebay for the > '486' bellhousing you mention. The seller claims it can fit up to a 12" > clutch. HTH. > > http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1851923845 > > - > Kurt Ehrhardt > ACES #1280 > 66 Malibu > 66 SuperSport > Enfield, CT > > - > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
Re: [Chevelle-List] Bellhousing question...
In a message dated 08/16/2002 12:42:54 PM Eastern Daylight Time, [EMAIL PROTECTED] writes: > All the ones on ebay are 681's, but this is part number 460486. Anybody know > anyhting about this bell? I thought only the 681's were for the big clutch, > but this one looks almost identical to the 681 Josh, You probably mean the '621' bellhousing for the 11" clutch. I've got one of those bells. Anyhow here is a link to an auction on ebay for the '486' bellhousing you mention. The seller claims it can fit up to a 12" clutch. HTH. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1851923845 - Kurt Ehrhardt ACES #1280 66 Malibu 66 SuperSport Enfield, CT - To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]