Re: E1 usage monitoring on AS5300 [7:26094]
Hi Symon, Could you pls let me know the OID you are using to monitior the E1 controller usage? Thanks, Vajira Symon Thurlow wrote: > Search for a program called MRTG > > It is free, requires configuration, but is an excellent tool for > rendering graphs of usage, as well as lots of other features and add > ins. > > I use it to moitor (amongst others) the modem usage on our AS5300. > > Cheers, > > Symon > > --- > > Hello Group, > > > > We have a AS5300 (for dialup clients) to which several E1's have > been > > plugged. > > Can any one of you tell me how to get SNMP based (or any other way) > > statistics so that USAGE of the E1's can be seperately monitored > over a > > period of time. > > > > Thanking in advance, > > Vajira > [EMAIL PROTECTED] > > > Cheers, > > Symon Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27641&t=26094 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CIT question [7:27964]
In a recent sitting for the CIT paper I found a question asking to name the "profile" which network engineers maintain, objective being to monitor/record a certain type of network activity over a period of time so that it could be useful in arriving into conclusions in a problematic situation. Does any one could give some clue as to what this "profile"is? Thanks - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27964&t=27964 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
EIGRP problem [7:33636]
I have a 2610 router having IP IOS software (12.0.8). This is connected to two different sites with 64kbps links. eg interface serial 0/0 ip address 192.168.1.1 255.255.255.252 interface serial 0/1 ip address 192.168.1.5 255.255.255.252 router is running with routing protocol EIGRP router eigrp 100 network 192.168.1.0 Problem: I'm able to work with only ONE serial link at a time. ie. If one serial link is active, other one becomes "line protocol down" If I remove the cable of the UP interface, the OTHER interface become UP I suspect this is due to the operation of EIGRP Because I cannot configure subnet mask for the network defined under eigrp 100 This particular IOS doesn't allow me to do this and DRAM and FLASH limitation prevents me from upgrading the IOS. Can any one tell me how to overcome the situation? Thanks, Vajira 12.0.8 ip - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33636&t=33636 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
HSRP timer dispute [7:64658]
Hi group, Let me apologise first for forwarding this stupid question as a networking engineer. But i need you guy's answers just to show to my client who doesnot believe what i'm saying. We have two 6509's connected by 4-gig etherchannel and configured HSRP groups in them for the default gateway redundancy of each VLAN. As you all know, default hello time is 3 sec and hold time is 10 sec. I have reconfigured these timers to hello 1 sec and hold 4 sec. Now client is unhappy because effectively I have increased the rate of hello packet sending by 3 times. He is worrying about the amount of hello traffic I have infused to this gigabit network. Does any one of you have any comment? Thanks - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64658&t=64658 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
E1 usage monitoring on AS5300 [7:26094]
Hello Group, We have a AS5300 (for dialup clients) to which several E1's have been plugged. Can any one of you tell me how to get SNMP based (or any other way) statistics so that USAGE of the E1's can be seperately monitored over a period of time. Thanking in advance, Vajira Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26094&t=26094 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bandwidth restrictions on serial ports [7:26188]
Hello Group, We have a small ISP which gives few 128k Leased lines (ppp configuration) from a Cisco 3640 router. This same router also the gateway to the international pipeline. Our requirement is to RESTRICT the international line usage by the Leased line customers. Preferably we look at limiting 128k leased lines to an effective 64k from our 3640, without making it appear to the customer end. Please let me know, is there a way to do the above restriction. Thanks, Vajira Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26188&t=26188 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Software WAN simulators [7:60007]
Hi Group, Does anyone know about a SOFTWARE WAN simulator which can do following general simulations - delay generation - error generation - WAN speed emulation What I mean by a software simulator is - a piece of software that can influence the flow if an IP packet stream between two IP devices, which is meant to be across a WAN. Thanking in advance, Vajira - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60007&t=60007 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
multiple Individual T1 termination --urgent [7:47944]
Hi Group, I have a client who needs 188 T1 (all 1.544Mb serial lines) terminations to be done on the central site. Network is hub and spoke fashion. Pls advise the suitable Cisco router/routers on the central site, for this purpose. Thanks. - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47944&t=47944 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: multiple Individual T1 termination --urgent [7:47944]
Hi Group, Thank you very much for your valuable comments, arguments and suggestions made on the above subject. It really helped me to reveal what is hiding at the customer premises. In fact we had to bid for re-structuring the client's existing network equipment. The client continually insisted that they are having is individual T1's. Further, we couldn't get an opportunity to inspect the site and even the client couldn't reveal the type of current routers used. bit tuff job. I had to forward some of the emails received from you'all to the client to convince them thay should be having T3's. Unfortuately the network was maintained by some third party and client was not too sure. However after some time, client confirmed that they are having T3'sinstead of T1's, with some apologies.. In fact, this is first time I came across a requirement of 188 T1's to connect. That's why I check with the group to see whether somebody has done it before..:)) So thanks again roberts, craig, brian, chuck, howard, peter, mike, phillip and nrf for the valuable input you have given. Take care. - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48081&t=47944 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: multiple Individual T1 termination --urgent [7:47944]
sorry whole project is on NDA signed. that's why so many restrictions.. least i can say is its on financial sector. "Roberts, Larry" wrote: > Wow, that makes be feel a little better, although I am still baffled buy the > sheer number T-3's required for that. I'm curious though what type of > business is this? Can you at least throw us a bone... > Thanks > > Larry > > > -Original Message- > From: Vajira Wijesinghe [mailto:[EMAIL PROTECTED]] > Sent: Thursday, July 04, 2002 3:12 AM > To: [EMAIL PROTECTED] > Subject: Re: multiple Individual T1 termination --urgent [7:47944] > > Hi Group, > > Thank you very much for your valuable comments, arguments and suggestions > made on the above subject. It really helped me to reveal what is hiding at > the customer premises. > > In fact we had to bid for re-structuring the client's existing network > equipment. The client continually insisted that they are having is > individual T1's. Further, we couldn't get an opportunity to inspect the site > and even the client couldn't reveal the type of current routers used. > bit tuff job. > > I had to forward some of the emails received from you'all to the client to > convince them thay should be having T3's. Unfortuately the network was > maintained by some third party and client was not too sure. However after > some time, client confirmed that they are having T3'sinstead of > T1's, with some apologies.. > > In fact, this is first time I came across a requirement of 188 T1's to > connect. That's why I check with the group to see whether somebody has done > it before..:)) > > So thanks again roberts, craig, brian, chuck, howard, peter, mike, phillip > and nrf for the valuable input you have given. > > Take care. > - (on postoffice) > > The information contained in this email is confidential and is meant to be > read only by the person to whom it is addressed.Please visit > http://www.millenniumit.com/legal/email.htm to read the entire > confidentiality clause. > > - - (on postoffice) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48097&t=47944 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
do you know why? [7:72352]
I have a pix firewall and i have a strange problem. If any one of you have come across this pls let me know the solution. I have few servers at both sides of the PIX. eg. Server-A at Outside zone and Server-B at Inside zone. 1. When I ping from Server-B to Server-A, I get request timeout. 2. Now I go to Server-A and start a ping to Server-B. It works fine. 3. Then again I go back to Server-B to ping to Server-A, and now it starts pinging!!! Can anyone of you explain this??? I need to get this thing resloved and straight away ping from B to A. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72352&t=72352 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: do you know why? [7:72352]
What I have is exactly 6.3 So it looks like a bug in the version? Thanks a lot Wilmes, for your observation and sharing with everyone. Wilmes, Rusty wrote: >sounds like from b > a you dont have an nat xlate established. > >when you go from a > b it creates the xlate so that b > a starts working. > >We had a problem after upgrading from 6.1.1 to 6.3 where one of our vpn >partners couldn't get in til we pinged a host on their side. Error in the >syslog was a deny due to no xlate. We were also losing NAT to arbitrary >addresses on port 80. We rolled back to 6.1.4 (the latest GD and all is >well). > >What version are you on? > >-Original Message- >From: Vajira Wijesinghe [mailto:[EMAIL PROTECTED] >Sent: Tuesday, July 15, 2003 3:23 PM >To: [EMAIL PROTECTED] >Subject: do you know why? [7:72352] > > >I have a pix firewall and i have a strange problem. >If any one of you have come across this pls let me know the solution. > >I have few servers at both sides of the PIX. >eg. Server-A at Outside zone and Server-B at Inside zone. > >1. When I ping from Server-B to Server-A, I get request timeout. >2. Now I go to Server-A and start a ping to Server-B. It works fine. >3. Then again I go back to Server-B to ping to Server-A, and now it >starts pinging!!! > >Can anyone of you explain this??? >I need to get this thing resloved and straight away ping from B to A. >Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72358&t=72352 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: do you know why? [7:72352]
Now i could narrow down the problem little bit. I observe this is happening ONLY to some Lantronix and Annex Terminal servers at outside zone.(where i gave the name server-A). Sun servers on the same subnet as of these terminal servers, do NOT show this abnormal behaviour and they respond straight away. Therefore this cannot be - a configuration issue - translate table issue Has anyone of you guys came across any inter-operability issues of these Terminal server brands with Cisco? thanks. "Wilmes, Rusty" wrote: > sounds like from b > a you dont have an nat xlate established. > > when you go from a > b it creates the xlate so that b > a starts working. > > We had a problem after upgrading from 6.1.1 to 6.3 where one of our vpn > partners couldn't get in til we pinged a host on their side. Error in the > syslog was a deny due to no xlate. We were also losing NAT to arbitrary > addresses on port 80. We rolled back to 6.1.4 (the latest GD and all is > well). > > What version are you on? > > -Original Message- > From: Vajira Wijesinghe [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 15, 2003 3:23 PM > To: [EMAIL PROTECTED] > Subject: do you know why? [7:72352] > > I have a pix firewall and i have a strange problem. > If any one of you have come across this pls let me know the solution. > > I have few servers at both sides of the PIX. > eg. Server-A at Outside zone and Server-B at Inside zone. > > 1. When I ping from Server-B to Server-A, I get request timeout. > 2. Now I go to Server-A and start a ping to Server-B. It works fine. > 3. Then again I go back to Server-B to ping to Server-A, and now it > starts pinging!!! > > Can anyone of you explain this??? > I need to get this thing resloved and straight away ping from B to A. > Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72419&t=72352 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: RE: NOBODY emails [7:72997]
ios bug has hit the mailing lists too... - Original Message - From: "Antero Vasconcelos" Date: Friday, July 25, 2003 4:21 pm Subject: RE: NOBODY emails [7:72997] > I4m just beeing tired of that person. > > antero > > -Original Message- > From: Taufik Kurniawan [mailto:[EMAIL PROTECTED] > Sent: sexta-feira, 25 de Julho de 2003 07:15 > To: [EMAIL PROTECTED] > Subject: Re: NOBODY emails [7:72997] > > > I got .. about 10 emails > > > At 03:56 25/07/2003 +, Puckette, Larry (TIFPC) wrote: > >Is anybody else receiving multiple emails from > [EMAIL PROTECTED] that > >are empty?? > > > >Larry Puckette > >Network Analyst > >Temple Inland > >[EMAIL PROTECTED] > >512-434-1838 > >Where there is no idol but money and power, there is no hope for > integrity.> > > -Original Message- > >From: Maximus [mailto:[EMAIL PROTECTED] > >Sent: Thursday, July 24, 2003 9:02 PM > >To: [EMAIL PROTECTED] > >Subject:RE: Vty access class [7:72990] > > > >I believe the standard ACL should be enough since your already > specifying>transport input ssh on line vty 0 4. > > > >Just my $0.02 > > > >Jablonski, Michael wrote: > > > > > > I'm having a bit of trouble with extended access-lists for vty > > > access. > > > Basically I'd like to setup an extended access list that only > > > allows ssh > > > access from certain IPs, but after creating the list and > > > applying it to the > > > VTY I lose access. But if I use a standard acl only allowing > > > certain IPs it > > > works fine... > > > > > > ip access-list extended local_shell > > > permit tcp host 192.168.1.2 host 192.168.1.1 eq 22 > > > > > > vty 0 4 > > > access-class local_shell in > > > transport input ssh > > > > > > Is the standard enough & is the above over-kill? > > > > > > Thanx, > > > mkj > *** > Este email assim como os ficheiros que possa ter em anexo sao > confidenciaise para uso exclusivo da pessoa ou organizacao para o > qual foi enviado. Se > recebeu esta mensagem por engano por favor notifique a Compta > atraves do > endereco [EMAIL PROTECTED] > > Esta mensagem foi verificada pelo sistema MAILsweeper nao tendo sido > encontrados virus. http://www.mimesweeper.com > > MAILsweeper - Modulo da suite MIMEsweeper, solucao de filtragem de > conteudoscomercializada pela Compta SA. > > A Compta SA detem o mais alto nivel de especializacao MIMEsweeper, > tendosido reconhecida pela Clearswift como Premier Partner. > *** > This message is confidential and may contain privileged > information intended > solely for the named addressee(s). It may not be used or disclosed > exceptfor the purpose for which it has been sent. > > If you are not the intended recipient, you must not copy, > distribute or take > any action in reliance on it. If you have received this message in > error,please notify Compta by emailing [EMAIL PROTECTED] > quoting the sender and > delete the message and any attached documents. > > This footnote confirms that this email message has been swept by > MIMEsweeperfor Content Security threats, including computer viruses > *** > Nondisclosure violations to [EMAIL PROTECTED] - (on sprinter) The information contained in this email is confidential and is meant to be read only by the person to whom it is addressed.Please visit http://www.millenniumit.com/legal/email.htm to read the entire confidentiality clause. - Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73021&t=72997 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]