More odd router occurances [7:61244]
It's getting to where I actually wish troubleshooting would come back to the lab ;-> had two routers go into endless reload tonight when I turned a few on to get some more practice. after going through the password recovery procedure for both, it appears that the two routers in question did not like the command "ip pim sparse-dense-mode" on the token ring interfaces. Which is interesting, because two other routers have that same configuration, and came up just fine. also - does anyone know what the command "ip kerberos source-interface any" does? I am unable to locate it in either the 12.1 or the 12.2 documentation. every time I reload any of my routers I get the error message % Invalid input detected at '^' marker. pointing to the kerberos line. I have issued "no" commands, but upon reload the damn thing is back in there. The IOS versions I am running are 56des just venting. -- TANSTAAFL "there ain't no such thing as a free lunch" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61244&t=61244 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: More odd router occurances [7:61244]
Maybe that message is coming from the Boot, which is older it two of the routers. I see it ocassionally, but it doesn't harm, since as soon as correct IOS loads, later on the boot process, the sentence will be understood. What I don't understand is the reason of the reloading... What can you see in Show ver regarding last boot? "The Long and Winding Road" Enviado por: [EMAIL PROTECTED] 17/01/2003 05:45 Por favor, responda a "The Long and Winding Road" Para: [EMAIL PROTECTED] cc: Asunto: More odd router occurances [7:61244] It's getting to where I actually wish troubleshooting would come back to the lab ;-> had two routers go into endless reload tonight when I turned a few on to get some more practice. after going through the password recovery procedure for both, it appears that the two routers in question did not like the command "ip pim sparse-dense-mode" on the token ring interfaces. Which is interesting, because two other routers have that same configuration, and came up just fine. also - does anyone know what the command "ip kerberos source-interface any" does? I am unable to locate it in either the 12.1 or the 12.2 documentation. every time I reload any of my routers I get the error message % Invalid input detected at '^' marker. pointing to the kerberos line. I have issued "no" commands, but upon reload the damn thing is back in there. The IOS versions I am running are 56des just venting. -- TANSTAAFL "there ain't no such thing as a free lunch" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61255&t=61244 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: More odd router occurances [7:61244]
""Francisco Sedano/Inf-Pronet"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Maybe that message is coming from the Boot, which is older it two of the > routers. I see it ocassionally, but it doesn't harm, since as soon as > correct IOS loads, later on the boot process, the sentence will be > understood. > > What I don't understand is the reason of the reloading... What can you see > in Show ver regarding last boot? the last boot occured after the password recovery process, during which I simply removed the command "ip pim sparse-dense-mode" from the token ring interface. it may be that the two token ring interfaces were in shutdown state, whereas the two routers that came up fine were operational. Once in a while I run into odd occurences with the 25xx series and the more recent IOS images. even with 16/16 once in a while something strange happens, something that a simple reload cures. I suspect that when the images start creeping into the 16 meg range, that the router runs out of places to put things. > > > > > > > "The Long and Winding Road" > Enviado por: [EMAIL PROTECTED] > 17/01/2003 05:45 > Por favor, responda a "The Long and Winding Road" > > Para: [EMAIL PROTECTED] > cc: > Asunto: More odd router occurances [7:61244] > > It's getting to where I actually wish troubleshooting would come back to > the > lab ;-> > > had two routers go into endless reload tonight when I turned a few on to > get > some more practice. > > after going through the password recovery procedure for both, it appears > that the two routers in question did not like the command "ip pim > sparse-dense-mode" on the token ring interfaces. Which is interesting, > because two other routers have that same configuration, and came up just > fine. > > also - does anyone know what the command "ip kerberos source-interface > any" > does? > > I am unable to locate it in either the 12.1 or the 12.2 documentation. > every time I reload any of my routers I get the error message % Invalid > input detected at '^' marker. pointing to the kerberos line. I have issued > "no" commands, but upon reload the damn thing is back in there. The IOS > versions I am running are 56des > > just venting. > > > > > > -- > TANSTAAFL > "there ain't no such thing as a free lunch" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61266&t=61244 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: More odd router occurances [7:61244]
The Long and Winding Road wrote: > > It's getting to where I actually wish troubleshooting would > come back to the > lab ;-> > > had two routers go into endless reload tonight when I turned a > few on to get > some more practice. > > after going through the password recovery procedure for both, > it appears > that the two routers in question did not like the command "ip > pim > sparse-dense-mode" on the token ring interfaces. Chuck, I've never tried enabling mcast on a TR interface. According to Cisco training material, it is strongly advised against. This is rooted in the fact that there is no difference between mcast and broadcast on a TR interface. I think you mentioned having sat the mcast/qos exam, so I reckon you know why. It has to do with the functional address format that TR uses. So I wouldn't be surprised to see a 2500 go into meltdown. > Which is > interesting, > because two other routers have that same configuration, and > came up just > fine. I think you nailed it with your followup comments. The others were probably disabled. > > also - does anyone know what the command "ip kerberos > source-interface any" > does? > > I am unable to locate it in either the 12.1 or the 12.2 > documentation. > every time I reload any of my routers I get the error message > % Invalid > input detected at '^' marker. pointing to the kerberos line. I > have issued > "no" commands, but upon reload the damn thing is back in there. > The IOS > versions I am running are 56des > > just venting. > > > > > > -- > TANSTAAFL > "there ain't no such thing as a free lunch" > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61274&t=61244 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]