[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-20-09 08:12 --- Just did a new install of 9.2RC2 onto a HP Pavilion 503a with Intel 845G/GL chipset .. I also have this problem (plus non-working ethernet).. Output of lspcidrake is below: agpgart : Intel Corporation|82845 845 Chipset Host Bridge (MCH) [BRIDGE_HOST] (vendor:8086 device:2560 subv:109f subd:3189) Card:Intel 845 : Intel Corporation|82845 CGC [Chipset Graphics Controller] [DISPLAY_VGA] (vendor:8086 device:2562 subv:109f subd:3189) usb-uhci: Intel Corporation|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c2 subv:109f subd:3189) usb-uhci: Intel Corporation|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c4 subv:109f subd:3189) usb-uhci: Intel Corporation|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c7 subv:109f subd:3189) ehci-hcd: Intel Corporation|82801DB USB Enhanced Controller [SERIAL_USB] (vendor:8086 device:24cd subv:109f subd:3189) i810_rng: Intel Corporation|82820 815e (Camino 2) Chipset PCI [BRIDGE_PCI] (vendor:8086 device:244e) i810-tco: Intel Corporation|82801DB 845G/GL Chipset ISA Bridge (ICH4) [BRIDGE_ISA] (vendor:8086 device:24c0) unknown : Intel Corporation|82801DB 845G/GL Chipset IDE Controller [STORAGE_IDE] (vendor:8086 device:24cb subv:109f subd:3189) unknown : Intel Corporation|82801DB SMBus Controller [SERIAL_SMBUS] (vendor:8086 device:24c3 subv:109f subd:3189) snd-intel8x0: Intel Corporation|ICH4 845G/GL Chipset AC'97 Audio Controller [MULTIMEDIA_AUDIO] (vendor:8086 device:24c5 subv:109f subd:3189) 8139too : Realtek|RTL-8139 [NETWORK_ETHERNET] (vendor:10ec device:8139 subv:109f subd:3189) Hsf:www.linmodems.org: Conexant|HSF 56k HSFi Modem [COMMUNICATION_OTHER] (vendor:14f1 device:2f00 subv:155d subd:8d8b) unknown : Linux 2.4.22-6mdk ehci_hcd|Intel Corp. 82801DB USB2 [Hub|Root Hub] (vendor: device:) unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub] (vendor: device:) unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub] (vendor: device:) modules.conf lists snd-intel8x0, but module is not loaded. Manual loading results in output below: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Output of dmesg follows: Linux version 2.4.22-6mdk ([EMAIL PROTECTED]) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Sun Sep 7 18:11:19 EDT 2003 BIOS-provided physical RAM map: BIOS-e820: - 0009f000 (usable) BIOS-e820: 0009f000 - 000a (reserved) BIOS-e820: 000e - 0010 (reserved) BIOS-e820: 0010 - 07cf (usable) BIOS-e820: 07cf - 07cff000 (ACPI data) BIOS-e820: 07cff000 - 07d0 (ACPI NVS) BIOS-e820: 07d0 - 07e8 (usable) BIOS-e820: 07e8 - 0800 (reserved) BIOS-e820: ff80 - ffc0 (reserved) BIOS-e820: fff0 - 0001 (reserved) 126MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000f6690 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a reserved twice. On node 0 totalpages: 32384 zone(0): 4096 pages. zone(1): 28288 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f66d0 ACPI: RSDT (v001 PTLTDRSDT 0x0604 LTP 0x) @ 0x07cf8bf7 ACPI: FADT (v001 INTEL NBGV 0x0604 PTL 0x0003) @ 0x07cfef14 ACPI: MADT (v001 PTLTD APIC 0x0604 LTP 0x) @ 0x07cfef88 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x0604 LTP 0x0001) @ 0x07cfefd8 ACPI: DSDT (v001 INTEL Brkdle_G 0x0604 MSFT 0x010d) @ 0x ACPI: Local APIC address 0xfee0 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: APIC at: 0xFEE0 I/O APIC #1 Version 32 at 0xFEC0. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount acpi=ht resume=/dev/hda5 Initializing CPU#0 Detected 1694.545 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3381.65 BogoMIPS Memory: 124172k/129536k available (1487k kernel code, 4912k reserved, -1936k data, 152k init, 0k highmem, 0k BadRAM) Dentry cache hash table entries:
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-20-09 13:18 --- Please test with the latest Cooker kernel wich is 2.4.22-10mdk -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-17-09 15:06 --- Mdk9.2rc2: The chip sound is detected during a fresh install. After some settings in kmix, the sound works fine. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|[EMAIL PROTECTED] |[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-07-09 01:22 --- this should be fine with current kernel -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-03-25 13:58 --- I have got, the same or equal problem with the Intel audion on ICH4 Mainboard (MSI) with 9.1RC2, I found out, that by defoult it try to start alsa and oss driver at the same time, I changed with harddrake the default driver to oss and Alsa desablet, since that it runs fine... --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
you neither run kde desktop nor run any kde apps under any other desktop/wm ? I run KDE, no sound when I run Kscd, Xmms (from menu and command line with soundwrapper) or just system sounds I also tried Gnome, just the same non system sound, Xmms idem, Kscd idem...
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
kde sound daemon (artsd) is using your sound card. you should hear sound in kde applications. if you run apps through their menu entries, most multimedia apps should use soundwrapper to disable artds while you use a sound app (game, sound editor, ...) you can try it by runnin eg soundwrapper xmms on the cli I tried both menu entries and command line ie soundwrapper xmms and still have no sound. I don't even have KDE sounds system. Any idea ?
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards--sound and IDE DMA do not work
mailinglist [EMAIL PROTECTED] writes: you can try it by runnin eg soundwrapper xmms on the cli I tried both menu entries and command line ie soundwrapper xmms and still have no sound. I don't even have KDE sounds system. Any idea ? you neither run kde desktop nor run any kde apps under any other desktop/wm ? killall artsd will stop artsf from using your sound card, but that is not the proper fix
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards--sound and IDE DMA do not work
lecorre [EMAIL PROTECTED] writes: I just made a fresh install of the RC2 and I have no sound with the Intel ICH4 I checked the volume level. There is no error message lspcidrake gives me: i810_audio : Intel Corporation|ICH4 845G/GL Chipset AC'97 Audio Controller The onboard audio is working perfectly under win2k (dual boot) Drivers are provided by http://www.soundmax.com classic bug sound tester: lspcidrake -v | fgrep AUDIO will tell you which driver your card use by default grep sound-slot /etc/modules.conf will tell you what driver it currently uses /sbin/lsmod will enable you to check if its module (driver) is loaded or not /sbin/chkconfig --list sound and /sbin/chkconfig --list alsa will tell you if sound and alsa services're configured to be run on initlevel 3 aumix -q will tell you if the sound volume is muted or not /sbin/fuser -v /dev/dsp will tell which program uses the sound card. as for your disk, is speed back ?
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
classic bug sound tester: lspcidrake -v | fgrep AUDIO will tell you which driver your card use by default i810_audio : Intel Corporation|ICH4 845G/GL Chipset AC'97 Audio Con [MULTIMEDIA_AUDIO] (vendor:8086 device:24c5 subv:1043 subd:80b0) grep sound-slot /etc/modules.conf will tell you what driver it currently uses alias sound-slot-0 i810_audio /sbin/lsmod will enable you to check if its module (driver) is loaded or not i810_audio 26248 1 soundcore 6276 0 [i810_audio] ac97_codec 12488 0 [i810_audio] /sbin/chkconfig --list sound and /sbin/chkconfig --list alsa will tell you if sound and alsa services're configured to be run on initlevel 3 sound 0:Arrêt 1:Arrêt 2:Marche3:Marche4:Marche 5:Marche alsa0:Arrêt 1:Arrêt 2:Marche3:Marche4:Marche 5:Marche aumix -q will tell you if the sound volume is muted or not vol 80, 80 everything is at 80 except Mic :) /sbin/fuser -v /dev/dsp will tell which program uses the sound card. USERPID ACCESS COMMAND /dev/dsp fab2170 f artsd so what's wrong with it ? as for your disk, is speed back ? I didn't encounter this problem, it is the original Reporter: [EMAIL PROTECTED] (Bill Unruh)
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
http://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-03-05 15:16 --- I just made a fresh install of the RC2 and I have no sound with the Intel ICH4 I checked the volume level. There is no error message lspcidrake gives me: i810_audio : Intel Corporation|ICH4 845G/GL Chipset AC'97 Audio Controller The onboard audio is working perfectly under win2k (dual boot) Drivers are provided by http://www.soundmax.com Config : Asus P4PE with onboard audio and Lan gigabit Intel PIV 2.4B --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards--sound and IDE DMA do not work
mailinglist [EMAIL PROTECTED] writes: /sbin/fuser -v /dev/dsp will tell which program uses the sound card. USERPID ACCESS COMMAND /dev/dsp fab2170 f artsd so what's wrong with it ? kde sound daemon (artsd) is using your sound card. you should hear sound in kde applications. if you run apps through their menu entries, most multimedia apps should use soundwrapper to disable artds while you use a sound app (game, sound editor, ...) you can try it by runnin eg soundwrapper xmms on the cli
Re: [Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards--sound and IDE DMA do not work
if you run apps through their menu entries, most multimedia apps should use soundwrapper to disable artds while you use a sound app (game, sound editor, ...) soundwrapper doesn't disable artsd (or esd) before starting the program, it launches the program using artsd (or esddsp) so that it can use artsd (or esd) for sound output.
[Cooker] [Bug 509] [kernel] Intel ICH4 based Motherboards-- sound and IDE DMA do not work
https://qa.mandrakesoft.com/show_bug.cgi?id=509 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 19:50 --- These bugs were already fixed in the 2.4.20 kernel, and I assume remain fixed in 2.4.21, but have not tested that and will not until it is finally released. On Fri, 21 Feb 2003, qa wrote: --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: The intel motherboards with the ICH4 controller have severe problems with kernel 2.4.19.16mdk. a) On boot up, the message PCI: Device 00:1f.1 not available because of resource collisions The relevant sections from dmesg are The first reference to 00:1f.1 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 9 for device 00:1f.1 PCI: Sharing IRQ 9 with 00:1d.2 .Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH4: (ide_setup_pci_device:) Could not enable device. hda: Maxtor 91531U3, ATA DISK drive hdb: ST340016A, ATA DISK drive hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 lspci gives ... 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) ... b) trying to start up dma does not work. hdparm /dev/hda /dev/hda: multcount= 16 (on) IO_support = 0 (default 16-bit) unmaskirq= 0 (off) using_dma= 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead= 8 (on) geometry = 1868/255/63, sectors = 30015216, start = 0 ]hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma= 0 (off) The disks are very slow. c) Sound does not work. The standare oss drivers do not load at all. -- error that the codec cannot be intialised. The alsa drivers load fine, but again no sound. (again using the onboard sound ICH4 sound card)